34 open source boards using the TX4138(ESOIC-8)

Real designs built with the TX4138(ESOIC-8), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

34 boardsClear filters|Most starred

How designs wire the TX4138(ESOIC-8)

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TX4138(ESOIC-8) connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a series capacitor on 8 of 8 designs, most often 100 nF.
  • The SW pin has a inductor on 8 of 8 designs, most often 33 µH.
  • The VIN pin has a capacitor to GND on 8 of 8 designs, most often 15 µF (then 100 nF).
  • The FB pin has a resistor to GND on 8 of 8 designs, most often 5.23 kΩ (then 10.5 kΩ).
SWpin 1Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (8)
  • Inductor on 100% · 33 µH (8)
  • Series resistor on 38%
ILIMpin 2, 9Connected to: Signal 100%
  • Series resistor on 88% · 30 mΩ (16)
VINpin 3Connected to: A connector 88%, TPS2375PW(TSSOP-8) 50%, TPS2378DDAR(HSOIC-8) 25%
  • Capacitor to GND on 100% · 15 µF (6), 100 nF (1), 100 µF (1)
  • Series resistor on 88% · 30 mΩ (8), 24.9 kΩ (6), 130 kΩ (1)
  • Series capacitor on 88% · 100 nF (7)
  • Resistor to GND on 50% · 9.1 kΩ (4), 4.7 kΩ (2)
GNDpin 4Connected to: GND 100%
FBpin 5Connected to: Signal 100%
  • Resistor to GND on 100% · 5.23 kΩ (5), 10.5 kΩ (3)
  • Capacitor to the supply on 100% · 12 pF (8)
  • Pull-up to 5V on 100% · 30.1 kΩ (5), 56.2 kΩ (3)
POKpin 7Connected to: Not connected 100%
BSpin 8Connected to: Signal 100%
  • Series resistor on 100% · 4.7 Ω (8)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-PoE Rev G1 by OLIMEX, ESP32-PoE-ISO Rev G1 by OLIMEX, ESP32-C6-EVB DIMM Rev A by OLIMEX and ESP32-PoE by BhoumikAcharya.

The TX4138(ESOIC-8) in open source designs

The gallery holds 34 open source boards using the TX4138(ESOIC-8) from 8 GitHub repositories; a typical one measures about 28 × 93 mm and carries around 129 components.

91% use four copper layers or more, and 41% carry an open source license.

The most starred is ESP32-PoE Rev L by OLIMEX.

Microcontrollers on boards using the TX4138(ESOIC-8)

What boards using the TX4138(ESOIC-8) are built for

TX4138(ESOIC-8): common questions

Where can I find a TX4138(ESOIC-8) reference design?

Each of the 34 boards on this page is a real design using the TX4138(ESOIC-8). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TX4138(ESOIC-8) SW pin connected?

The SW pin has a series capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the TX4138(ESOIC-8).

How is the TX4138(ESOIC-8) VIN pin connected?

The VIN pin has a capacitor to GND on 8 of 8 designs, most often 15 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the TX4138(ESOIC-8).

What resistor goes on the TX4138(ESOIC-8) FB pin?

The FB pin has a resistor to GND on 8 of 8 designs, most often 5.23 kΩ (then 10.5 kΩ). Counted from the KiCad layouts of 8 open source designs using the TX4138(ESOIC-8).

What parts are used alongside the TX4138(ESOIC-8)?

The LAN8710A-EZC(QFN32), SY8089AAAC(SOT23-5), BL4054B-42TPRN(SOT23-5), CH340T(SSOP20W) and SN74LVC1G04DBVR(SOT23-5) appear in the most repositories here.

Which microcontrollers do boards using the TX4138(ESOIC-8) use?

Most are built on ESP32 (33).

How big is a typical board using the TX4138(ESOIC-8)?

The median is 28 × 93 mm, and 9% are two-layer designs.

What is the most popular open source board using the TX4138(ESOIC-8)?

By GitHub stars, ESP32-PoE Rev L by OLIMEX, with 407 stars.

Can I simulate one of these boards using the TX4138(ESOIC-8) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part