12 open source boards using the TPS2378DDAR(HSOIC-8)
Real designs built with the TPS2378DDAR(HSOIC-8), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-PoE-ISO Rev N1
OLIMEX
28 × 98.2 mm131 parts4LNo license145POEv3
OLIMEX
30 × 30 mm29 parts4LGPL-3.01ESP32
ESP32-PoE
BhoumikAcharya
28 × 80 mm130 parts4LNo license1ESP32
ESP32-PoE-ISO Rev N
fso-dev-man
28 × 98.2 mm130 parts4LNo license0ESP32
ESP32-PoE Rev M2
OLIMEX
28 × 80 mm131 parts4LApache-2.0407ESP32
ESP32-PoE-ISO Rev N
OLIMEX
28 × 98.2 mm130 parts4LNo license145ESP32
ESP32-PoE-ISO Rev M1
fso-dev-man
28 × 98.2 mm129 parts4LNo license0ESP32
ESP32-PoE Rev M
OLIMEX
28 × 80 mm130 parts4LApache-2.0407ESP32
ESP32-PoE-ISO Rev M1
OLIMEX
28 × 98.2 mm129 parts4LNo license145ESP32
ESP32-PoE Rev M1
OLIMEX
28 × 80 mm130 parts4LApache-2.0407ESP32
ESP32-PoE-ISO Rev M
fso-dev-man
28 × 98.2 mm128 parts4LNo license0ESP32
ESP32-PoE-ISO Rev M
OLIMEX
28 × 98.2 mm128 parts4LNo license145
How designs wire the TPS2378DDAR(HSOIC-8)
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS2378DDAR(HSOIC-8) connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a series resistor on 5 of 5 designs, most often 24.9 kΩ (then 30 mΩ).
- The VDD pin has a resistor to GND on 5 of 5 designs, most often 9.1 kΩ.
- The VDD pin has a capacitor to GND on 5 of 5 designs, most often 15 µF (then 100 µF).
- The VDD pin has a series capacitor on 5 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: TX4138(ESOIC-8) 100%, a connector 100% |
|
| DENpin 2 | Connected to: Signal 100% |
|
| CLSpin 3 | Connected to: Signal 100% |
|
| VSSpin 4 | Connected to: A connector 100% |
|
| RTNpin 5 | Connected to: GND 100% | — |
| T2Ppin 7 | Connected to: Not connected 100% | — |
| APDpin 8 | Connected to: GND 100% | — |
| EPADpin 9 | Connected to: A connector 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-PoE Rev M by OLIMEX, ESP32-PoE-ISO Rev M by OLIMEX, ESP32-PoE by BhoumikAcharya and POEv3 by OLIMEX.
The TPS2378DDAR(HSOIC-8) in open source designs
The gallery holds 12 open source boards using the TPS2378DDAR(HSOIC-8) from 5 GitHub repositories; a typical one measures about 28 × 98.2 mm and carries around 130 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is ESP32-PoE Rev M2 by OLIMEX.
Parts used alongside the TPS2378DDAR(HSOIC-8)
Microcontrollers on boards using the TPS2378DDAR(HSOIC-8)
What boards using the TPS2378DDAR(HSOIC-8) are built for
TPS2378DDAR(HSOIC-8): common questions
Where can I find a TPS2378DDAR(HSOIC-8) reference design?
Each of the 12 boards on this page is a real design using the TPS2378DDAR(HSOIC-8). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS2378DDAR(HSOIC-8) VDD pin?
The VDD pin has a series resistor on 5 of 5 designs, most often 24.9 kΩ (then 30 mΩ). Counted from the KiCad layouts of 5 open source designs using the TPS2378DDAR(HSOIC-8).
What resistor goes on the TPS2378DDAR(HSOIC-8) DEN pin?
The DEN pin has a series resistor on 5 of 5 designs, most often 24.9 kΩ. Counted from the KiCad layouts of 5 open source designs using the TPS2378DDAR(HSOIC-8).
What resistor goes on the TPS2378DDAR(HSOIC-8) CLS pin?
The CLS pin has a series resistor on 5 of 5 designs, most often 1.27 kΩ (then 66.5 Ω). Counted from the KiCad layouts of 5 open source designs using the TPS2378DDAR(HSOIC-8).
What parts are used alongside the TPS2378DDAR(HSOIC-8)?
The TX4138(ESOIC-8), CH340X(MSOP-10), ESP32-WROOM-32E-N4, LAN8710A-EZC(QFN32) and NA(SN74LVC1G04DBVR(SOT23-5)) appear in the most repositories here.
Which microcontrollers do boards using the TPS2378DDAR(HSOIC-8) use?
Most are built on ESP32 (11).
How big is a typical board using the TPS2378DDAR(HSOIC-8)?
The median is 28 × 98.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS2378DDAR(HSOIC-8)?
By GitHub stars, ESP32-PoE Rev M2 by OLIMEX, with 407 stars.
Can I simulate one of these boards using the TPS2378DDAR(HSOIC-8) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.