STMP15X-SHIELD
OLIMEX·STMP15X-SHIELD·HARDWARE/STMP15x-SHIELD_Rev_A/STMP15x-SHIELD_Rev_A.kicad_pcb
About the STMP15X-SHIELD
STMP15X-SHIELD is an open source PCB design by OLIMEX, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 43.9 × 59.7 mm, with 20 components from 11 distinct parts.
By type, the board carries 9 resistors, 1 inductor and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Shield for Industrial grade STMP157-OLinuXino which adds two UEXT, 40 GPIO, micro SD card
Product page: https://www.olimex.com/Products/OLinuXino/STMP1/STMP15X-SHIELD/open-source-hardware
STMP15X-SHIELD bill of materials (BOM)
20 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | P-B-V-40-LF | GBH-254-SMT-40 | EXT1 |
| 3 | YA-V36P-2X20-LF | GPCB127SMT-02X20(YA-V36P-2X20-LF) | GPIO-1, GPIO-2, GPIO-3 |
| 1 | TFC-WXCP11-08-LF | TFC-WXCP11-08-LF | MICRO_SD1 |
| 1 | NA(HN1x2) | HN1x2_Jumper | NRST1 |
| 1 | RA1206_(4x0603)_4B8_100k | RA1206_(4X0603)_4B8_xx | RM1 |
| 2 | P-B-V-10-LF | GBH-254-SMT-10 | UEXT1, UEXT2 |
| 1 | FB0805/600R/2A | L_0805_5MIL_DWS | L1 |
| 1 | 47uF/6.3V/20%/X5R/C0805 | C_0805_5MIL_DWS | C1 |
| 5 | 10k/R0402 | R_0402_5MIL_DWS | R1, R4, R5, R8, R9 |
| 1 | NA(2.2k/R0402) | R_0402_5MIL_DWS | R2 |
| 3 | 2.2k/R0402 | R_0402_5MIL_DWS | R3, R6, R7 |
STMP15X-SHIELD design files
The KiCad project lives in the OLIMEX/STMP15X-SHIELD repository on GitHub; these links point at the commit this page was built from.
STMP15X-SHIELD: common questions
How big is the STMP15X-SHIELD?
The STMP15X-SHIELD measures 43.9 × 59.7 mm, has 2 copper layers and is 1.68 mm thick.
How many components are on the STMP15X-SHIELD?
20 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the STMP15X-SHIELD design files?
From the OLIMEX/STMP15X-SHIELD repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STMP15X-SHIELD design in my own project?
Yes, under the terms of its GPL-3.0 license, which OLIMEX chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979