USB-GIGABIT Rev C
About the USB-GIGABIT Rev C PCB
USB-GIGABIT Rev C is an open source PCB design by OLIMEX, published on GitHub. It is a 4-layer board measuring 51.5 × 19 mm, with 48 components from 23 distinct parts.
Other key parts include the USBA30MALE, 93LC46, RTL8153VC-CG and SY8089AAAC. By type, the board carries 25 capacitors, 15 resistors, 4 ICs, 2 inductors and 1 crystal.
From the project
USB 1.1, USB 2.0, USB 3.0 to Ethernet 10/100/1000Mbit converter
Transfer troughput is up to 950Mbits/s when connected to USB 3.0 ports and GbE network.
Using the A20 OLinuXino boards and USB 2.0 host the speed is: upload 319 Mbit, download 295 Mbit.
Using the commands listed above and good grade Gigabit equipment.
Main components on the USB-GIGABIT Rev C
USB-GIGABIT Rev C bill of materials (BOM)
48 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBA30MALE | USB3_A_MALE | U1 |
| 1 | 93LC46 | SO-8 | U2 |
| 1 | RTL8153VC-CG RTL8153VCCG | QFN48-6x6mm-OLIMEX_V2 | U3 |
| 1 | SY8089AAAC SY8009AAAC(SOT23-5) | SOT-23-5 | U4 |
| 1 | 25MHZ/20PPM/20PF/4P/3225 SMD РЕЗ. 3225 25 Mhz 20 pf 30ppm 4p | TSX-3.2x2.5mm_GND(4) | X1 |
| 1 | TM211Q01FM22 | TM211Q01FM22 | LAN1 |
| 1 | 600OHM/2A/UPZ2012E-601-2R0TF/0805 FB0805 | L_0805_5MIL_DWS | FB1 |
| 1 | 2.2UH/NRS3015T2R2MNGH 2.2uH | CD32 | L1 |
| 16 | 100nF | C_0402_5MIL_DWS | C1, C2, C10, C11, C14, C15, C16, C18 +8 |
| 2 | 100nF | C_0805_5MIL_DWS | C3, C4 |
| 1 | 100nF/50V | C_0805_5MIL_DWS | C5 |
| 1 | n.a. | C_0402_5MIL_DWS | C6 |
| 2 | 39PF/C0G/50VDC/0402 39 pF | C_0402_5MIL_DWS | C7, C8 |
| 1 | 1nF/2kV/X7R | C_1206_5MIL_DWS_ISO | C9 |
| 2 | 2.2uF | C_0603_5MIL_DWS | C12, C17 |
| 2 | 1K/0402 1K | R_0603_5MIL_DWS | R1, R7 |
| 2 | 22R/0402 22R | R_0402_5MIL_DWS | R2, R3 |
| 1 | 10R/0805 10R | R_0805_5MIL_DWS | R4 |
| 3 | n.a. | R_0402_5MIL_DWS | R5, R6, R13 |
| 1 | 2.49K/1% | R_0603_5MIL_DWS | R8 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2.2K/0402 2.2K | R_0402_5MIL_DWS | R9, R11 |
| 2 | dnp | R_0402_5MIL_DWS | R10, R14 |
| 2 | 1.1K/1% | R_0603_5MIL_DWS | R12, R15 |
USB-GIGABIT Rev C design files
The KiCad project lives in the OLIMEX/USB-GIGABIT repository on GitHub; these links point at the commit this page was built from.
USB-GIGABIT Rev C: common questions
How big is the USB-GIGABIT Rev C PCB?
The USB-GIGABIT Rev C measures 51.5 × 19 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the USB-GIGABIT Rev C?
48 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-GIGABIT Rev C design files?
From the OLIMEX/USB-GIGABIT repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the USB-GIGABIT Rev C design in my own project?
The repository has no license, so all rights stay with OLIMEX. Use it as a reference, and ask the author before reusing the design.
