USB-GIGABIT Rev E
About the USB-GIGABIT Rev E PCB
USB-GIGABIT Rev E is an open source PCB design by OLIMEX, published on GitHub. It is a 4-layer board measuring 51.5 × 19 mm, with 49 components from 22 distinct parts.
Other key parts include the NA(93LC46), RTL8153VC-CG and SY8089AAAC. By type, the board carries 25 capacitors, 15 resistors, 3 ICs, 2 inductors and 1 crystal.
From the project
USB 1.1, USB 2.0, USB 3.0 to Ethernet 10/100/1000Mbit converter
Transfer troughput is up to 950Mbits/s when connected to USB 3.0 ports and GbE network.
Using the A20 OLinuXino boards and USB 2.0 host the speed is: upload 319 Mbit, download 295 Mbit.
Using the commands listed above and good grade Gigabit equipment.
Main components on the USB-GIGABIT Rev E
USB-GIGABIT Rev E bill of materials (BOM)
49 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NA(93LC46) | SO-8 | U2 |
| 1 | RTL8153VC-CG | QFN48-6x6mm-OLIMEX_V2 | U3 |
| 1 | SY8089AAAC | SOT-23-5 | U4 |
| 1 | 25MHZ/20PPM/20PF/4P/3225 25MHz/20ppm/20pF/4P/3225 | Oscillator-18.432MHz-3.2x2.5mm | X1 |
| 1 | TM211Q01FM22(LPJG16402AQNL) | TM211Q01FM22 | LAN1 |
| 1 | Sign_RoHS_1 | Sign_RoHS_1 | Sign_RoHS_1 |
| 1 | USB1065 | USB3_A_MALE | USB1 |
| 1 | 600OHM/2A/UPZ2012E-601-2R0TF/0805 | L_0805_5MIL_DWS | FB1 |
| 1 | 2.2UH/NRS3015T2R2MNGH 2.2uH/NRS3015T2R2MNGH | CD32 | L1 |
| 18 | 100nF/10V/X5R /20%/0402 | C_0402_5MIL_DWS | C1, C2, C3, C4, C10, C11, C14, C15 +10 |
| 1 | 100nF/50V/Y5V/20% | C_0805_5MIL_DWS | C5 |
| 1 | NA | C_0402_5MIL_DWS | C6 |
| 2 | 39PF/C0G/50VDC/0402 39pF/C0G/50VDC/0402 | C_0402_5MIL_DWS | C7, C8 |
| 1 | 1nF/2000V/10%/X7R/1206 | C_1206_5MIL_DWS_ISO | C9 |
| 2 | 2.2uF/X5R/6.3V/10%/0603 | C_0603_5MIL_DWS | C12, C17 |
| 2 | 1K/0402 | R_0402_5MIL_DWS | R1, R7 |
| 2 | 22R/0402 | R_0402_5MIL_DWS | R2, R3 |
| 1 | 10R/0805 | R_0805_5MIL_DWS | R4 |
| 5 | NA | R_0402_5MIL_DWS | R5, R6, R10, R13, R14 |
| 1 | 2.49K/1%/0402 | R_0402_5MIL_DWS | R8 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2.2K/0402 | R_0402_5MIL_DWS | R9, R11 |
| 2 | 1.1K/1%/0402 | R_0402_5MIL_DWS | R12, R15 |
USB-GIGABIT Rev E design files
The KiCad project lives in the OLIMEX/USB-GIGABIT repository on GitHub; these links point at the commit this page was built from.
USB-GIGABIT Rev E: common questions
How big is the USB-GIGABIT Rev E PCB?
The USB-GIGABIT Rev E measures 51.5 × 19 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the USB-GIGABIT Rev E?
49 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-GIGABIT Rev E design files?
From the OLIMEX/USB-GIGABIT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB-GIGABIT Rev E design in my own project?
The repository has no license, so all rights stay with OLIMEX. Use it as a reference, and ask the author before reusing the design.
