HardLabs

Data aquisition module

olin-electric-motorsports·oem-monorepo·vehicle/mkviii/hardware/hv/bms_da/data_aquisition_module.kicad_pcb

Data aquisition module layout, top view — open source board by olin-electric-motorsports

About the Data aquisition module

Data aquisition module is an open source PCB design by olin-electric-motorsports, published on GitHub under the MIT license. It is a 4-layer board measuring 86 × 34.4 mm, with 67 components from 12 distinct parts.

Other key parts include the LTC1380xGN and MCP6001T-I/OT. By type, the board carries 44 resistors, 12 capacitors, 8 ICs, 2 LEDs and 1 connector.

From the project

This monorepo centralizes Olin Electric Motorsports’ KiCad designs and STM32 firmware into a single place. It helps with immediate contribution through standardized environments and automated CAN signal tracking. This unified structure makes sure that there is architectural consistency across all vehicle electrical systems.

Welcome to the Olin Electric Motorsports monorepo. This is the home for all of our electrical, firmware, and software work.

This document will help you get started contributing and walk you through important steps for working on the team.

If you are on a completely fresh Ubuntu computer, you won't have the tools needed to download this repository yet. Open your terminal (Ctrl + Alt + T) and run these commands one by one to install Git and clone our code:

Data aquisition module, from the project README
From the project README

Main components on the Data aquisition module

LTC1380xGNMCP6001T-I/OT

Data aquisition module bill of materials (BOM)

67 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
LTC1380xGN
LTC1380IGN
U1, U2, U3, U4
4
MCP6001T-I/OT
MCP6001T-I-LT
U5, U6, U7, U8
1
CONN_pcie_x4
J1
2
B1701TW--20P000314U1930
WHITE
PD1, PD2
4
CL10B105KA8NNNC
C_1uF
C1, C2, C3, C4
4
CL10B104KB8NNWC
1uF
C5, C7, C9, C11
4
CL10B103KB8NNNC
1uF
C6, C8, C10, C12
32
RMCF0603FT100K
R_100K
R1, R2, R3, R4, R5, R6, R7, R8 +24
4
RMCF0603FT1K00
1M
R33, R35, R37, R39
4
RMCF0603FT100R
3.3K
R34, R36, R38, R40
2
RMCF0603FT1K00
1KR
R41, R42
2
WR06X153 JTL
4.7K
R43, R44

Data aquisition module design files

The KiCad project lives in the olin-electric-motorsports/oem-monorepo repository on GitHub; these links point at the commit this page was built from.

Data aquisition module: common questions

How big is the Data aquisition module?

The Data aquisition module measures 86 × 34.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Data aquisition module?

67 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Data aquisition module design files?

From the olin-electric-motorsports/oem-monorepo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Data aquisition module design in my own project?

Yes, under the terms of its MIT license, which olin-electric-motorsports chose for the repository.

More boards in oem-monorepo