HardLabs

Working

oomlout·oomlout_oomp_module_src·modules/breakout_board_mcu_mega_devkitc_esp32_nano_atmega328p_pico_raspberry_pi_2040/working/kicad/current_version/working/working.kicad_pcb

Working PCB layout, top view — open source Raspberry Pi board by oomlout

About the Working PCB

Working is an open source Raspberry Pi PCB design by oomlout, published on GitHub. It is a 2-layer board measuring 6.2 × 26.7 mm, with 3 components from 3 distinct parts.

Its main chip is the bbmcu_electronic_breakout_board_pico_mcu_raspberry_pi_2040, from the Raspberry Pi family.

Working bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
bbmcu_electronic_breakout_board_pico_mcu_raspberry_pi_2040
BB_MEGA_1
1
bbmcu_electronic_breakout_board_shennie_mcu_atmega328p
BB_MEGA_2
1
bbmcu_electronic_breakout_board_devkitc_mcu_espressif_esp32
BB_MEGA_3

Working design files

The KiCad project lives in the oomlout/oomlout_oomp_module_src repository on GitHub; these links point at the commit this page was built from.

Working: common questions

What microcontroller does the Working use?

The Working is built around the bbmcu_electronic_breakout_board_pico_mcu_raspberry_pi_2040, from the Raspberry Pi family.

How big is the Working PCB?

The Working measures 6.2 × 26.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Working?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Working design files?

From the oomlout/oomlout_oomp_module_src repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Working design in my own project?

The repository has no license, so all rights stay with oomlout. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Working without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in oomlout_oomp_module_src

Similar boards