TankController
Open-Acidification·TankController-KiCad
About the TankController PCB
TankController is an open source PCB design by Open-Acidification, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 74.9 × 114.2 mm, with 43 components from 25 distinct parts.
Other key parts include the TPS561208DDC. By type, the board carries 8 capacitors, 5 connectors, 1 IC, 1 LED, 1 inductor and 1 resistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
KiCad files for pcb design for Open Acidification pH-stat unit
The Tank Controller project utilizes a half-shield for an Arduino Mega. This repo holds the PCB specification used to create the half-shield.
1. KiCad - The PCB layout was created with KiCad which works on multiple platforms.
1. Clone this repo to your local computer. 1. Open KiCad. 1. Use the KiCad menu to open the HalfShield.pro project file. File -> Open Project Navigate to your local repo location and select HalfShield.pro project file. 1. View the PCB.
Main components on the TankController
TankController bill of materials (BOM)
43 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS561208DDC | SOT95P280X110-6N | U1 |
| 5 | Conn_01x03_Male | Pin_Header_Straight_1x03_Pitch2.54mm | J1, J2, J3, J4, J5 |
| 8 | HEADER_1 | Pin_Header_Straight_1x01_Pitch2.54mm | A_Buck1, A_Buck2, A_Buck_9V1, A_Buck_GND1, R_Buck2, R_Buck_1, R_Buck_5V1, R_Buck_GND1 |
| 1 | HEADER_18x2 | Pin_Header_Straight_2x18_Pitch2.54mm | Arduino_Block1 |
| 2 | HEADER_4 | Pin_Header_Straight_1x04_Pitch2.54mm | Arduino_Block2, Relay_control1 |
| 1 | HEADER_6 | Pin_Header_Straight_1x06_Pitch2.54mm | Arduino_Block3 |
| 1 | 100nF | C_0603 | Cbst1 |
| 1 | 22uF | C_0805 | Cin1 |
| 1 | 47uF | C_1206 | Cout1 |
| 1 | HEADER_8 | Pin_Header_Straight_1x08_Pitch2.54mm | Keypad1 |
| 1 | WC1602A | WC1602A_mod | LCD1 |
| 1 | Conn_01x05_Female | Pin_Header_Straight_1x05_Pitch2.54mm | PCF8523_RTC1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_PT-3.5mm_4pol | PT100_Input1 |
| 1 | HEADER_8 | Socket_Strip_Straight_1x08_Pitch2.54mm | PT100_amp1 |
| 1 | Screw_Terminal_01x05 | TerminalBlock_RND_205-00004_Pitch5.00mm | Power_Screws1 |
| 1 | POT | Potentiometer_Trimmer_Vishay_T73YP_Horizontal | RV1 |
| 1 | HEADER_3 | Pin_Header_Straight_1x03_Pitch2.54mm | Relay_pwr1 |
| 1 | 10kOhm | R_0805 | Rfbb1 |
| 1 | 82.5kOhm | R_0805 | Rfbt1 |
| 1 | HEADER_5 | Socket_Strip_Straight_1x05_Pitch2.54mm | pH_carrier1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Jack_3.5mm_5pin | Stereo_Jack_3.5mm_Switch_Ledino_KB3SPRS | PT100_Jack1 |
| 1 | 4.7uH | SRN6045-4R7Y | L1 |
| 7 | C | C_0805 | C1, C2, C3, C4, C5, C6, C7 |
| 1 | C-device | C_0805 | C8 |
| 1 | R | R_0805 | R1 |
TankController design files
The KiCad project lives in the Open-Acidification/TankController-KiCad repository on GitHub; these links point at the commit this page was built from.
- LayoutHalf_Shield.kicad_pcb
TankController: common questions
How big is the TankController PCB?
The TankController measures 74.9 × 114.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TankController?
43 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the TankController design files?
From the Open-Acidification/TankController-KiCad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TankController design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which Open-Acidification chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979