HardLabs

Cargo vent cargo smoke

OpenA3XX·opena3xx-cockpit·overhead/right/cargo-vent_cargo-smoke/cargo-vent_cargo-smoke.kicad_pcb

Cargo vent cargo smoke PCB layout, top view — open source board by OpenA3XX

About the Cargo vent cargo smoke PCB

Cargo vent cargo smoke is an open source PCB design by OpenA3XX, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 145 × 127.5 mm, with 65 components from 7 distinct parts.

By type, the board carries 42 diodes, 14 resistors and 4 connectors.

From the project

OpenA3XX: Panels, 3D Printed Components & Reference Archive

As part of a long-term flight simulation setup, I'm building a home Airbus cockpit replica, focusing on authenticity, durability, and modularity. This project includes:

- Accurate panel layouts (e.g., ADIRS, FLT-CTL, etc.) - Reference imagery from real cockpits - 3D printed components (knobs, switch housings, structural parts) - Design schematics, templates, and notes from real-world dimensions - Documentation of tools and techniques used in building panels

Cargo vent cargo smoke, from the project README
From the project README

Cargo vent cargo smoke bill of materials (BOM)

65 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CONN_01X04_PIN
Conn_02x01
J1
1
Conn_02x20_Counter_Clockwise
J2
1
Conn_02x01
J3
1
Conn_02x01
J4
5
~
KR1, KR2, KR3, KR4, KR5
42
LED
D1, D2, D3, D4, D5, D6, D7, D8 +34
14
220R
R1, R2, R3, R4, R5, R6, R7, R8 +6

Cargo vent cargo smoke design files

The KiCad project lives in the OpenA3XX/opena3xx-cockpit repository on GitHub; these links point at the commit this page was built from.

Cargo vent cargo smoke: common questions

How big is the Cargo vent cargo smoke PCB?

The Cargo vent cargo smoke measures 145 × 127.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cargo vent cargo smoke?

65 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cargo vent cargo smoke design files?

From the OpenA3XX/opena3xx-cockpit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Cargo vent cargo smoke design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in opena3xx-cockpit