HardLabs

Oxygen calls rain rplnt wipers

OpenA3XX·opena3xx-cockpit·overhead/left/oxygen_calls_rain-rplnt_wipers/oxygen_calls_rain-rplnt_wipers.kicad_pcb

Oxygen calls rain rplnt wipers PCB layout, top view — open source board by OpenA3XX

About the Oxygen calls rain rplnt wipers PCB

Oxygen calls rain rplnt wipers is an open source PCB design by OpenA3XX, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 145 × 170.2 mm, with 74 components from 8 distinct parts.

By type, the board carries 45 diodes, 15 resistors and 9 connectors.

From the project

OpenA3XX: Panels, 3D Printed Components & Reference Archive

As part of a long-term flight simulation setup, I'm building a home Airbus cockpit replica, focusing on authenticity, durability, and modularity. This project includes:

- Accurate panel layouts (e.g., ADIRS, FLT-CTL, etc.) - Reference imagery from real cockpits - 3D printed components (knobs, switch housings, structural parts) - Design schematics, templates, and notes from real-world dimensions - Documentation of tools and techniques used in building panels

Oxygen calls rain rplnt wipers, from the project README
From the project README

Oxygen calls rain rplnt wipers bill of materials (BOM)

74 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CONN_01X04_PIN
Conn_02x01
J1
1
Conn_02x01
J2
1
Conn_02x20_Counter_Clockwise
J3
5
Conn_02x01
J4, J5, J6, J7, J8
1
Conn_02x02_Counter_Clockwise
J9
5
~
KR1, KR2, KR3, KR4, KR5
45
LED
D1, D2, D3, D4, D5, D6, D7, D8 +37
15
220R
R1, R2, R3, R4, R5, R6, R7, R8 +7

Oxygen calls rain rplnt wipers design files

The KiCad project lives in the OpenA3XX/opena3xx-cockpit repository on GitHub; these links point at the commit this page was built from.

Oxygen calls rain rplnt wipers: common questions

How big is the Oxygen calls rain rplnt wipers PCB?

The Oxygen calls rain rplnt wipers measures 145 × 170.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Oxygen calls rain rplnt wipers?

74 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Oxygen calls rain rplnt wipers design files?

From the OpenA3XX/opena3xx-cockpit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Oxygen calls rain rplnt wipers design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in opena3xx-cockpit