HardLabs

GRF-DFN6-15-23A

OpenAir-Lab·capstone-project·Documentation/Reference Designs/Guerrilla RF/GRF-DFN6-15-23A/GRF-DFN6-15-23A.kicad_pcb

GRF-DFN6-15-23A PCB layout, top view — open source board by OpenAir-Lab
Simulate this board

About the GRF-DFN6-15-23A PCB

GRF-DFN6-15-23A is an open source PCB design by OpenAir-Lab, published on GitHub under the MIT license. It is a 4-layer board measuring 30.5 × 30.5 mm, with 17 components from 8 distinct parts.

Other key parts include the GRF2106. By type, the board carries 13 modules, 1 IC and 1 connector.

From the project

ECE 438X Senior Design Capstone Project

Maintained in this documentation directory are the reference designs utilized in the "Schematic Recapture" process.

Schematic recapture is the process of going from either provided vendor-specific design files created by their preferred Electronic Design Assistant (EDA) or provided generated fabrication outputs, i.e. GERBER and Excellon/NC Drill files.

The intent is to go from fabrication outputs or EDA-specific project files to a KiCAD project. - This means converting imported symbols into 'real' KiCAD symbols. If first-party symbols are not available or are incomplete, the next preference…

Main components on the GRF-DFN6-15-23A

GRF2106

GRF-DFN6-15-23A bill of materials (BOM)

17 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
GRF2106
DFN-6_GENERICUPDATED
U$1
3
0.5pF
M1, M11, M13
4
100pF
M2, M3, M4, M12
3
0 Ohm
M5, M6, M9
2
0.1uF
M7, M8
1
220nH WW
M10
1
MOLEX_KK_HEADER_3-PIN_0.100-INCH
J1
2
SMA-142-0701-801/806
RFIN0, RFOUT0

GRF-DFN6-15-23A design files

The KiCad project lives in the OpenAir-Lab/capstone-project repository on GitHub; these links point at the commit this page was built from.

GRF-DFN6-15-23A: common questions

How big is the GRF-DFN6-15-23A PCB?

The GRF-DFN6-15-23A measures 30.5 × 30.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the GRF-DFN6-15-23A?

17 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the GRF-DFN6-15-23A design files?

From the OpenAir-Lab/capstone-project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the GRF-DFN6-15-23A design in my own project?

Yes, under the terms of its MIT license, which OpenAir-Lab chose for the repository.

More boards in capstone-project