Audio
OpenAir-Lab·capstone-project·Hardware/KiCAD/audio-modulino/Audio PCB.kicad_pcb
About the Audio PCB
Audio is an open source PCB design by OpenAir-Lab, published on GitHub under the MIT license. It is a 2-layer board measuring 41 × 25.4 mm, with 22 components from 20 distinct parts.
Other key parts include the MAX98357A. By type, the board carries 9 resistors, 6 jumpers, 3 capacitors, 1 IC, 1 crystal and 1 speaker.
It belongs with the audio designs in this gallery.
From the project
ECE 438X Senior Design Capstone Project
Main components on the Audio
Audio bill of materials (BOM)
22 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U7 |
| 1 | EYESPI | Adafruit EYESPI FPC Connector | X2 |
| 1 | GAIN_{LOGIC} | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP11 |
| 1 | Driver | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP12 |
| 1 | GAIN_{R} | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP13 |
| 1 | CH_LEFT | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP14 |
| 1 | CH_MONO_MIX | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP15 |
| 1 | CH_RIGHT | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP16 |
| 1 | Speaker | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | LS2 |
| 1 | ICS-43434 | InvenSense_ICS-43434-6_3.5x2.65mm | MK2 |
| 1 | 1uF | C_0603_1608Metric | C86 |
| 1 | 0.1uF | C_0603_1608Metric | C94 |
| 1 | 22pF | C_0603_1608Metric | C97 |
| 2 | 47k | R_0603_1608Metric | R20, R21 |
| 1 | 68 | R_0603_1608Metric | R22 |
| 2 | 2k | R_0603_1608Metric | R23, R27 |
| 1 | 100k 5% | R_0603_1608Metric | R24 |
| 1 | 634k | R_0603_1608Metric | R25 |
| 1 | 330k | R_0603_1608Metric | R26 |
| 1 | 100k | R_0603_1608Metric | R28 |
Audio design files
The KiCad project lives in the OpenAir-Lab/capstone-project repository on GitHub; these links point at the commit this page was built from.
Audio: common questions
How big is the Audio PCB?
The Audio measures 41 × 25.4 mm, has 2 copper layers and is 1.646 mm thick.
How many components are on the Audio?
22 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Audio design files?
From the OpenAir-Lab/capstone-project repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Audio design in my own project?
Yes, under the terms of its MIT license, which OpenAir-Lab chose for the repository.
More boards in capstone-project
System testbed
OpenAir-Lab
57 × 41 mm166 parts4LMIT3Rf transceiver modulino
OpenAir-Lab
57 × 41 mm95 parts4LMIT3CC1200EMK-420-470
OpenAir-Lab
39.3 × 56.7 mm72 parts4LMIT3Hmi modulino
OpenAir-Lab
70 × 57.5 mm60 parts2LMIT3CC1200EMK-420-470-old
OpenAir-Lab
39.3 × 56.7 mm53 parts4LMIT3Rf amplifier modulino
OpenAir-Lab
41 × 41 mm50 parts4LMIT3ESP32
Mcu modulino
OpenAir-Lab
68.9 × 53.3 mm36 parts4LMIT3Rf switch modulino
OpenAir-Lab
25.4 × 41.4 mm21 parts4LMIT3ESP32
Testbed mcu
OpenAir-Lab
69.6 × 55.9 mm19 parts2LMIT3GRF-DFN6-15-23A
OpenAir-Lab
30.5 × 30.5 mm17 parts4LMIT3
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687