Hmi modulino
OpenAir-Lab·capstone-project·Hardware/KiCAD/hmi-modulino/hmi-modulino.kicad_pcb
About the Hmi modulino PCB
Hmi modulino is an open source PCB design by OpenAir-Lab, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 57.5 mm, with 60 components from 20 distinct parts.
Other key parts include the PCF8575PWR, PEC11J-9215F-S0015 and MAX98357A. By type, the board carries 17 switches, 16 diodes, 13 resistors, 5 capacitors, 3 ICs and 2 crystals.
From the project
ECE 438X Senior Design Capstone Project
Main components on the Hmi modulino
Hmi modulino bill of materials (BOM)
60 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCF8575PWR | SSOP-24_5.3x8.2mm_P0.65mm | IC1 |
| 1 | PEC11J-9215F-S0015 | PEC11J9215FS0015 | U1 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U2 |
| 2 | EYESPI | Adafruit EYESPI FPC Connector | X1, X2 |
| 1 | GAIN_{LOGIC} | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP4 |
| 1 | GAIN_{R} | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP6 |
| 1 | Speaker | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | LS1 |
| 1 | ICS-43434 | InvenSense_ICS-43434-6_3.5x2.65mm | MK1 |
| 17 | 434133025816 | 434133025816 | S1, S2, S3, S4, S5, S6, S7, S8 +9 |
| 16 | D | D_0603_1608Metric | D1:1, D1:2, D1:3, D1:4, D2:1, D2:2, D2:3, D2:4 +8 |
| 2 | 0.01uF | C_0603_1608Metric | C1, C2 |
| 1 | 1uF | C_0603_1608Metric | C3 |
| 1 | 0.1uF | C_0603_1608Metric | C4 |
| 1 | 22pF | C_0603_1608Metric | C7 |
| 7 | 10k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7 |
| 2 | 47k | R_0603_1608Metric | R8, R9 |
| 1 | 68 | R_0603_1608Metric | R10 |
| 1 | 100k 5% | R_0603_1608Metric | R12 |
| 1 | 2k | R_0603_1608Metric | R15 |
| 1 | 100k | R_0603_1608Metric | R16 |
Hmi modulino design files
The KiCad project lives in the OpenAir-Lab/capstone-project repository on GitHub; these links point at the commit this page was built from.
Hmi modulino: common questions
How big is the Hmi modulino PCB?
The Hmi modulino measures 70 × 57.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hmi modulino?
60 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hmi modulino design files?
From the OpenAir-Lab/capstone-project repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Hmi modulino design in my own project?
Yes, under the terms of its MIT license, which OpenAir-Lab chose for the repository.
More boards in capstone-project
System testbed
OpenAir-Lab
57 × 41 mm166 parts4LMIT3Rf transceiver modulino
OpenAir-Lab
57 × 41 mm95 parts4LMIT3CC1200EMK-420-470
OpenAir-Lab
39.3 × 56.7 mm72 parts4LMIT3CC1200EMK-420-470-old
OpenAir-Lab
39.3 × 56.7 mm53 parts4LMIT3Rf amplifier modulino
OpenAir-Lab
41 × 41 mm50 parts4LMIT3ESP32
Mcu modulino
OpenAir-Lab
68.9 × 53.3 mm36 parts4LMIT3Audio
OpenAir-Lab
41 × 25.4 mm22 parts2LMIT3Rf switch modulino
OpenAir-Lab
25.4 × 41.4 mm21 parts4LMIT3ESP32
Testbed mcu
OpenAir-Lab
69.6 × 55.9 mm19 parts2LMIT3GRF-DFN6-15-23A
OpenAir-Lab
30.5 × 30.5 mm17 parts4LMIT3