OpenHardwareExG Shield Test Board Riser Base
OpenElectronicsLab·OpenHardwareExG_Shield·OpenHardwareExG_Shield_Test_Harness/kicad-files/OpenHardwareExG_Shield_Test_Board_Riser_Base.kicad_pcb
About the OpenHardwareExG Shield Test Board Riser Base
OpenHardwareExG Shield Test Board Riser Base is an open source PCB design by OpenElectronicsLab, published on GitHub under the CERN-OHL-1.2 license. It is a 4-layer board measuring 147.3 × 81.3 mm, with 51 components from 2 distinct parts.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Arduino shield OpenHardwareExG
The OpenHardwareExG_Shield is a platform for ECG, EEG, EMG, ENG, EOG, and evoked potential applications using an Arduino.
http://openelectronicslab.github.io/OpenHardwareExG_Shield/
https://github.com/OpenElectronicsLab/OpenHardwareExGShieldArduino_Library
OpenHardwareExG Shield Test Board Riser Base bill of materials (BOM)
51 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 50 | CONN_1 | POGO_HEAD_HOLE | P1, P2, P3, P4, P5, P6, P7, P8 +42 |
| 1 | VAL** | Hole_M3 | Hole_M3 |
OpenHardwareExG Shield Test Board Riser Base design files
The KiCad project lives in the OpenElectronicsLab/OpenHardwareExG_Shield repository on GitHub; these links point at the commit this page was built from.
OpenHardwareExG Shield Test Board Riser Base: common questions
How big is the OpenHardwareExG Shield Test Board Riser Base?
The OpenHardwareExG Shield Test Board Riser Base measures 147.3 × 81.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the OpenHardwareExG Shield Test Board Riser Base?
51 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OpenHardwareExG Shield Test Board Riser Base design files?
From the OpenElectronicsLab/OpenHardwareExG_Shield repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the OpenHardwareExG Shield Test Board Riser Base design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which OpenElectronicsLab chose for the repository.
More boards in OpenHardwareExG_Shield
AVR/Arduino
OpenHardwareExG Shield
OpenElectronicsLab
125.1 × 59.7 mm195 parts4LCERN-OHL-1.28AVR/Arduino
OpenHardwareExG Shield Test Board all panelled
OpenElectronicsLab
147.3 × 81.3 mm124 parts4LCERN-OHL-1.28AVR/Arduino
OpenHardwareExG Shield Test Board
OpenElectronicsLab
147.3 × 81.3 mm124 parts4LCERN-OHL-1.28
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979