Analog solder station
About the Analog solder station PCB
Analog solder station is an open source PCB design by ostojaatanasijevic, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 65 components from 30 distinct parts.
Other key parts include the L7805, LMT84LPM, AP2111H-3.3, BluePill and NCS21802DMR2G. By type, the board carries 25 resistors, 18 capacitors, 6 ICs, 6 connectors, 5 transistors and 4 diodes.
Main components on the Analog solder station
Analog solder station bill of materials (BOM)
65 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220-3_Vertical | U1 |
| 1 | LMT84LPM | TO-92_Inline_W4.0mm_Horizontal_FlatSideDown | U2 |
| 1 | AP2111H-3.3 | SOT-223 | U4 |
| 1 | BluePill | BluePill | U5 |
| 1 | NCS21802DMR2G | OnSemi_Micro8 | U9 |
| 1 | Screen | WC1602A | U17 |
| 1 | MMBT5401 | SOT-23 | Q1 |
| 3 | MMBT5551L | SOT-23 | Q2, Q6, Q7 |
| 1 | IRF5305 | TO-220-3_Vertical | Q3 |
| 1 | Hirose RPC1-12RB-6P(71) | Hirose_RPC1 | J2 |
| 1 | SWD | IDC-Header_2x03_P2.54mm_Vertical | J3 |
| 1 | UART | PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | RESET | PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | PEC11R-4220F-S0024 | RotaryEncoder_PEC11R_PEC12R | SW2 |
| 4 | 1N4148WS | D_SOD-323 | D1, D2, D3, D11 |
| 2 | 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6 |
| 6 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C8, C9, C19, C45 |
| 2 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C20 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | UCY2V220MPD9TD 100u | CP_Radial_D8.0mm_P3.50mm | C5, C32 |
| 3 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C17, C21 |
| 2 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C16 |
| 1 | 220p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 11 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R8, R9, R11, R13, R15 +3 |
| 3 | 22k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R24, R27 |
| 1 | 10 mOhm | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R5 |
| 2 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 5 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R12, R14, R16, R19 |
| 3 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R25, R55 |
Analog solder station design files
The KiCad project lives in the ostojaatanasijevic/analog_solder_station repository on GitHub; these links point at the commit this page was built from.
Analog solder station: common questions
How big is the Analog solder station PCB?
The Analog solder station measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Analog solder station?
65 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Analog solder station design files?
From the ostojaatanasijevic/analog_solder_station repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Analog solder station design in my own project?
The repository has no license, so all rights stay with ostojaatanasijevic. Use it as a reference, and ask the author before reusing the design.