Plug in supply distributor
OUXT-Polaris·plug-in-supply-distributor
About the Plug in supply distributor PCB
Plug in supply distributor is an open source PCB design by OUXT-Polaris, published on GitHub under the MIT license. It is a 2-layer board measuring 56 × 34.6 mm, with 35 components from 24 distinct parts.
Other key parts include the TLP291, BD450M5FP and SN74LVC1G27DBVR. By type, the board carries 15 resistors, 6 diodes, 5 connectors, 4 ICs, 3 capacitors and 2 transistors.
From the project
PCB design files for a power distribution board that plugs into a base board.
This is one of the boards under development by OUXT for the RobotX competition. It is part of the power supply system for the controller, and has connector interlocking, simple reverse voltage protection, fuse monitoring and external input functions.
KiCAD ( https://www.kicad.org/ ) is used for circuit design and PCB layout.
The symbol libraries and footprint libraries used in this schematic and PCB layout are basically KiCAD standard libraries, but some of them are in the following repositories.

Main components on the Plug in supply distributor
Plug in supply distributor bill of materials (BOM)
35 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TLP291 | SOIC-4_4.55x2.6mm_P1.27mm | U1, U2 |
| 1 | BD450M5FP | TO-252-2 | U4 |
| 1 | SN74LVC1G27DBVR | SOT-23-6 | U5 |
| 1 | 2N7002K | SOT-23 | Q1 |
| 1 | FDD9509L-F085 | TO-252-2 | Q2 |
| 1 | Conn_02x18_Odd_Even | TEConnectivity_2-5530843-7_card-edge | J1 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Horizontal | J2 |
| 2 | PV-3 | PV-3_via | J3, J5 |
| 1 | PV-3 | PV-3 | J4 |
| 1 | D_Zener | D_SMC | D1 |
| 1 | OSHR1608 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | SMAJ12CA-E3/61 | D_SMA | D3 |
| 1 | RB162M-40TR | D_SOD-123 | D4 |
| 1 | OSBL1608 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | B340A-13-F | D_SMA | D6 |
| 1 | 10u 35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 22u 10V | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 1 | 0.1u 25V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 2 | 4.7k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R5 |
| 3 | 1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 47k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7 |
| 1 | 47 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 6 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R10, R11, R13, R14, R15 |
| 1 | 20k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12 |
Plug in supply distributor design files
The KiCad project lives in the OUXT-Polaris/plug-in-supply-distributor repository on GitHub; these links point at the commit this page was built from.
Plug in supply distributor: common questions
How big is the Plug in supply distributor PCB?
The Plug in supply distributor measures 56 × 34.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Plug in supply distributor?
35 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Plug in supply distributor design files?
From the OUXT-Polaris/plug-in-supply-distributor repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Plug in supply distributor design in my own project?
Yes, under the terms of its MIT license, which OUXT-Polaris chose for the repository.