2 open source boards using the SN74LVC1G27DBVR
Real designs built with the SN74LVC1G27DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Plug in supply distributor
OUXT-Polaris
56 × 34.6 mm35 parts2LMIT0ESP32
Shack Relay Matrix rev C: controller board
PE1RGU
152 × 122.5 mm79 parts4LCERN-OHL-S-2.02
The SN74LVC1G27DBVR in open source designs
The gallery holds 2 open source boards using the SN74LVC1G27DBVR from 2 GitHub repositories; a typical one measures about 104 × 78.6 mm and carries around 57 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Shack Relay Matrix rev C: controller board by PE1RGU.
Microcontrollers on boards using the SN74LVC1G27DBVR
What boards using the SN74LVC1G27DBVR are built for
SN74LVC1G27DBVR: common questions
Where can I find a SN74LVC1G27DBVR reference design?
Each of the 2 boards on this page is a real design using the SN74LVC1G27DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC1G27DBVR use?
Most are built on ESP32 (1).
How big is a typical board using the SN74LVC1G27DBVR?
The median is 104 × 78.6 mm, and 50% are two-layer designs.
What is the most popular open source board using the SN74LVC1G27DBVR?
By GitHub stars, Shack Relay Matrix rev C: controller board by PE1RGU, with 2 stars.
Can I simulate one of these boards using the SN74LVC1G27DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.