Deltavr hmd
About the Deltavr hmd PCB
Deltavr hmd is an open source PCB design by oxy-2, published on GitHub under the MIT license. It is a 2-layer board measuring 48.2 × 48.5 mm, with 13 components from 9 distinct parts.
Other key parts include the NRF24L01_BREAKOUT, nice_nano and SS49E. By type, the board carries 5 capacitors, 3 ICs, 3 resistors, 1 connector and 1 diode.
From the project
me and friends build a open source vr headset based on hades vr (not anymore) and using psmove to offer a cost effective wired pcvr solution with a smaller size than other similar projects
me and a friend build a open source thin vr headset from scratch with stacked fresnel lenses to act as pseudo pancake lenses, high performance lsm6d family imus, inside out SLAM tracking for the hmd unit via 4 ov9281 cameras and ORB-SLAM3 along with constellation and imu tracked controllers using fully rechargeable and replaceable easy to source 3.7v LiPo batteries.
Main components on the Deltavr hmd
Deltavr hmd bill of materials (BOM)
13 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NRF24L01_BREAKOUT LSM6DSVTR | LGA14-L_2P59X3P1X0P5_STM-M | U1 |
| 1 | nice_nano | nice_nano | U2 |
| 1 | SS49E NRF24L01_Breakout | nRF24L01_Breakout | U3 |
| 1 | Conn_02x07_Top_Bottom | PinHeader_2x07_P2.54mm_Vertical | J1 |
| 1 | 850NM LED_RAGB | LED_D5.0mm-4_RGB_Wide_Pins | D1 |
| 1 | 10UF 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 3 | 100NF 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C5 |
| 1 | 100NF 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 3 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
Deltavr hmd design files
The KiCad project lives in the oxy-2/deltavr repository on GitHub; these links point at the commit this page was built from.
Deltavr hmd: common questions
How big is the Deltavr hmd PCB?
The Deltavr hmd measures 48.2 × 48.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Deltavr hmd?
13 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Deltavr hmd design files?
From the oxy-2/deltavr repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Deltavr hmd design in my own project?
Yes, under the terms of its MIT license, which oxy-2 chose for the repository.
