EOS-homework
OzelHD·EOS-homework-PCB·PCB/EOS-homework-PCB.kicad_pcb
About the EOS-homework PCB
EOS-homework is an open source STM32 PCB design by OzelHD, published on GitHub. It is a 4-layer board measuring 31 × 39.5 mm, with 47 components from 28 distinct parts.
Its main chip is the STM32WB55CEU6, from the STM32 family. Other key parts include the MIC5365-3.3YD5 and USBLC6-2SC6. By type, the board carries 19 capacitors, 9 resistors, 4 connectors, 4 diodes, 3 ICs and 3 inductors.
It belongs with the wearables designs in this gallery.
From the project
This board is a tutorial follow-along for the EOS homework assignment. It is designed to be a simple board that can be used to learn about PCB design and manufacturing. Layout Video, PCB video :) # Include documentation here
This board is a tutorial follow-along for the EOS homework assignment. It is designed to be a simple board that can be used to learn about PCB design and manufacturing. Layout Video, PCB video :) # Include documentation here
The documentation can be very similar to your wiki article
use git submodule init && git submodule update --remote --recursive to get the submodules, and then you can use the project as a normal KiCAD project.
Main components on the EOS-homework
EOS-homework bill of materials (BOM)
47 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32WB55CEU6 | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | MIC5365-3.3YD5 | TSOT-23-5 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | 32MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | X1 |
| 1 | 32kHz768 | Crystal_SMD_2012-2Pin_2.0x1.2mm | X2 |
| 1 | Conn_ST_STDC14 | IDC-Header_2x07_P1.27mm_Vertical_SMD | J1 |
| 1 | Conn_01x04 | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J2 |
| 1 | Conn_Coaxial | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J3 |
| 1 | USB-C MCU | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
| 1 | DLF162500LT-5028A1 | DLF162500LT-5028A1 | FLT1 |
| 1 | Reset | SW_Push_Wuerth_434123025826 | SW1 |
| 1 | TestPoint_Square | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP3 |
| 1 | 82402374 | SOT-353_SC-70-5 | D1 |
| 1 | Green | LED_0603_1608Metric | D2 |
| 2 | Red | LED_0603_1608Metric | D3, D4 |
| 1 | 10n | L_0402_1005Metric | L1 |
| 1 | 10u | L_0805_2012Metric | L2 |
| 1 | 2n7 | L_0402_1005Metric | L3 |
| 3 | 4u7/16V | C_0805_2012Metric | C1, C6, C14 |
| 10 | 100n/50V | C_0603_1608Metric | C2, C3, C4, C5, C7, C8, C9, C10 +2 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10p | C_0603_1608Metric | C11, C13 |
| 2 | 1u/50V | C_0603_1608Metric | C15, C19 |
| 1 | 0p8 | C_0603_1608Metric | C16 |
| 1 | 0p3 | C_0603_1608Metric | C17 |
| 3 | 1k | R_0603_1608Metric | R1, R8, R9 |
| 3 | 100R | R_0603_1608Metric | R2, R3, R5 |
| 1 | 10k | R_0603_1608Metric | R4 |
| 2 | 5k1 | R_0603_1608Metric | R6, R7 |
EOS-homework design files
The KiCad project lives in the OzelHD/EOS-homework-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/EOS-homework-PCB.kicad_pcb
- SchematicPCB/EOS-homework-PCB.kicad_sch
EOS-homework: common questions
What microcontroller does the EOS-homework use?
The EOS-homework is built around the STM32WB55CEU6, from the STM32 family.
How big is the EOS-homework PCB?
The EOS-homework measures 31 × 39.5 mm, has 4 copper layers and is 1.579 mm thick.
How many components are on the EOS-homework?
47 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the EOS-homework design files?
From the OzelHD/EOS-homework-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the EOS-homework design in my own project?
The repository has no license, so all rights stay with OzelHD. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the EOS-homework without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k