HardLabs

Digital-Photo-Frame-ESP32

pablovazquezmartinez·Digital-Photo-Frame-ESP32·hardware/PCB/PCB_digitalscreen.kicad_pcb

Digital-Photo-Frame-ESP32 PCB layout, top view — open source board by pablovazquezmartinez
Simulate this board

About the Digital-Photo-Frame-ESP32 PCB

Digital-Photo-Frame-ESP32 is an open source PCB design by pablovazquezmartinez, published on GitHub under the MIT license. It is a 2-layer board measuring 86.5 × 73.5 mm, with 26 components from 16 distinct parts.

Other key parts include the TP4056-42-ESOP8. By type, the board carries 10 resistors, 6 connectors, 4 capacitors, 2 diodes and 1 IC.

It belongs with the power & battery and displays & leds designs in this gallery.

From the project

This project showcases the design and development of a digital photo frame based on the ESP32. It extracts images from a Micro SD and renders them on a TFT ILI9341 display. It features low power consumption, the hardware includes a TP4056 module, for charging and uninterrupted operation. This project is beginner-friendly and easily customizable.

A DIY digital photo frame project using an ESP32 and an ILI9341 TFT display. This project features a dual SPI bus configuration to eliminate data interference and maximize image loading speeds. The repository also includes a custom PCB design, including all KiCad source and fabrication files. The board is production-ready and plug-and-play.

The script prompts you for the full path of your source image folder. It then automatically scales, converts, and exports all compatible files into a newly created Images-ready-to-use/ directory.

Digital-Photo-Frame-ESP32, from the project README
From the project README

Main components on the Digital-Photo-Frame-ESP32

TP4056-42-ESOP8

Digital-Photo-Frame-ESP32 bill of materials (BOM)

26 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TP4056-42-ESOP8
U1
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J1
2
CONN_01X15_SOCKET
Conn_01x15_Socket
J2, J4
1
CONN_01X02_PIN
Conn_01x02_Pin
J3
1
Micro_SD_Card
J5
1
CONN_01X08_SOCKET
Conn_01x08_Socket
J6
2
SW_Push
Next_button1, Previous_button1
1
SW_SPDT
On-off_switch1
1
LED_GREEN_0805
D1
1
LED_RED_0805
D2
3
10μF
C1, C2, C3
1
100NF
100nF
C4
2
5,1kΩ
R1, R2
2
1kΩ
R3, R4
1
1,2kΩ
R5
5
10kΩ
R6, R7, R8, R9, R10

Digital-Photo-Frame-ESP32 design files

The KiCad project lives in the pablovazquezmartinez/Digital-Photo-Frame-ESP32 repository on GitHub; these links point at the commit this page was built from.

Digital-Photo-Frame-ESP32: common questions

How big is the Digital-Photo-Frame-ESP32 PCB?

The Digital-Photo-Frame-ESP32 measures 86.5 × 73.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Digital-Photo-Frame-ESP32?

26 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Digital-Photo-Frame-ESP32 design files?

From the pablovazquezmartinez/Digital-Photo-Frame-ESP32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Digital-Photo-Frame-ESP32 design in my own project?

Yes, under the terms of its MIT license, which pablovazquezmartinez chose for the repository.

Similar boards