Stm32-custom dev board

panchacharam·stm32-custom-dev-board

Stm32-custom dev board layout, top view — open source STM32 board by panchacharam

About the Stm32-custom dev board

Stm32-custom dev board is an open source STM32 PCB design by panchacharam, published on GitHub under the MIT license. It is a 2-layer board measuring 40.3 × 35.3 mm, with 28 components from 15 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Custom STM32 PCB designed using KiCad

A custom STM32-based PCB designed using KiCad.

This project is a compact STM32 development board created for learning PCB design, embedded systems, and STM32 hardware development.

- STM32 microcontroller - USB interface - 3.3V regulator - Crystal oscillator - GPIO headers - Decoupling capacitors - Two-layer PCB routing

- 2-layer PCB - Compact PCB layout - USB power support - STM32 minimum system design - Custom routing - Ground plane - 3D PCB visualization

Main components on the Stm32-custom dev board

Stm32-custom dev board bill of materials (BOM)

28 components, 15 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F103C8T6
U2
1
16MHZ
Y1
1
USB_B_Micro
J1
3
Conn_01x04_Male
J2, J3, J4
1
SW_SPDT
SW1
1
RED
D1
1
120R
FB1
2
22U
C1, C2
6
100n
C3, C4, C5, C6, C7, C11
1
10n
C8
2
1u
C9, C10
2
10P
C12, C13
4
1K5
R1, R3, R4, R5
1
10k
R2

Stm32-custom dev board design files

The KiCad project lives in the panchacharam/stm32-custom-dev-board repository on GitHub; these links point at the commit this page was built from.

Stm32-custom dev board: common questions

What microcontroller does the Stm32-custom dev board use?

The Stm32-custom dev board is built around the STM32F103C8T6, from the STM32 family.

How big is the Stm32-custom dev board?

The Stm32-custom dev board measures 40.3 × 35.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm32-custom dev board?

28 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stm32-custom dev board design files?

From the panchacharam/stm32-custom-dev-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Stm32-custom dev board design in my own project?

Yes, under the terms of its MIT license, which panchacharam chose for the repository.

Can I test firmware for the Stm32-custom dev board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards