HardLabs

ZLight CC2652

paoloach·ZLight_CC2652·Schematic/ZLight_V2/ZLight_V2.kicad_pcb

ZLight CC2652 PCB layout, top view — open source board by paoloach

About the ZLight CC2652 PCB

ZLight CC2652 is an open source PCB design by paoloach, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 100 × 100 mm, with 42 components from 17 distinct parts.

Other key parts include the PT4115, E72-2G4M20S1E, LM1117-3.3 and PIR. By type, the board carries 21 diodes, 7 resistors, 4 ICs, 4 capacitors, 2 connectors and 2 switches.

It belongs with the iot & wireless, sensors and test & measurement designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

A light and a PIR handled by Zigbee

The firmware is made for a CC2652RB and CC2652P TI chips and it is avaiable under the firmware folder. The first version was for E72-2G4M05S1F (CC2652RB) module but for his shortage, I migrated to the E72-2G4M05S1E module, based on CC2652P1F chip.

For licence issue, I can't put the sources, but you can request at me (pachdjian@gmail.com)

Into firmware folder there are both the firmware. Into Box, there is a Freecad model for a box I made Into Schematic thare is two versions on a KiCad circuit with a PCB layout. The first version is for a E72-2G4M05S1F and it is without a PIR connector. The…

Main components on the ZLight CC2652

PT4115E72-2G4M20S1ELM1117-3.3PIR

ZLight CC2652 bill of materials (BOM)

42 components, 17 distinct parts.

QtyPartRefs
1
PT4115
U1
1
E72-2G4M20S1E
U2
1
LM1117-3.3
U3
1
PIR
U4
2
XH2-L
J1, J2
1
JFT-5-MALE
DEBUG1
2
ButtonSMD
SW1, SW2
1
SS34
D1
18
LED
D2, D3, D4, D5, D6, D7, D8, D9 +10
2
LED
D20, D21
1
68uh
L1
1
100uf
C1
2
10uF
C2, C3
1
100nF
C4
2
0.13
R1, R2
4
1k
R3, R4, R5, R6
1
4.7k
R7

ZLight CC2652 design files

The KiCad project lives in the paoloach/ZLight_CC2652 repository on GitHub; these links point at the commit this page was built from.

ZLight CC2652: common questions

How big is the ZLight CC2652 PCB?

The ZLight CC2652 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ZLight CC2652?

42 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the ZLight CC2652 design files?

From the paoloach/ZLight_CC2652 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ZLight CC2652 design in my own project?

Yes, under the terms of its Apache-2.0 license, which paoloach chose for the repository.

Earlier revisions in the repo: ZLight

Similar boards