AltBoard2025
About the AltBoard2025 PCB
AltBoard2025 is an open source AVR/Arduino PCB design by papurika37, published on GitHub. It is a 2-layer board measuring 30.5 × 35.5 mm, with 27 components from 17 distinct parts.
Its main chip is the ATmega328P-A, from the AVR/Arduino family. Other key parts include the MCP25625-x-SS and R-78E5.0-0.5. By type, the board carries 6 capacitors, 6 resistors, 5 diodes, 4 ICs, 3 connectors and 2 crystals.
From the project
KUBTSS Avionics 25th designed by pprk
Main components on the AltBoard2025
AltBoard2025 bill of materials (BOM)
27 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP25625-x-SS | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | ATmega328P-A | TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | R-78E5.0-0.5 | Converter_DCDC_RECOM_R-78E-0.5_THT | U3 |
| 1 | ~ | DFROBOT_SEN0001_v5 | U4 |
| 2 | 16MHz | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1, Y2 |
| 2 | RJ25 | RJ25_Wayconn_MJEA-660X1_Horizontal | J1, J2 |
| 1 | ICSP | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | RST | SW_SPST_PTS810 | SW1 |
| 2 | RB160M | D_SOD-123 | D1, D2 |
| 1 | CAN | LED_0603_1608Metric | D3 |
| 1 | ERR | LED_0603_1608Metric | D4 |
| 1 | PWR | LED_0603_1608Metric | D5 |
| 1 | 10u | C_0603_1608Metric | C1 |
| 5 | 0.1u | C_0603_1608Metric | C2, C3, C4, C5, C6 |
| 1 | 120 | R_0603_1608Metric | R1 |
| 2 | 10k | R_0603_1608Metric | R2, R6 |
| 3 | 1k | R_0603_1608Metric | R3, R4, R5 |
AltBoard2025 design files
The KiCad project lives in the papurika37/KUBTSS_Board25 repository on GitHub; these links point at the commit this page was built from.
AltBoard2025: common questions
What microcontroller does the AltBoard2025 use?
The AltBoard2025 is built around the ATmega328P-A, from the AVR/Arduino family.
How big is the AltBoard2025 PCB?
The AltBoard2025 measures 30.5 × 35.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AltBoard2025?
27 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the AltBoard2025 design files?
From the papurika37/KUBTSS_Board25 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AltBoard2025 design in my own project?
The repository has no license, so all rights stay with papurika37. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AltBoard2025 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in KUBTSS_Board25
AVR/ArduinoDisplayBoard2025
121.7 × 37.4 mm85 parts2LNo license0
ESP32RadioBoard2025
69.5 × 86.5 mm60 parts2LNo license0
AVR/ArduinoPowerMeter2025
101.3 × 23.1 mm52 parts2LNo license0
AVR/ArduinoPitotBoard2025
27.1 × 42.7 mm46 parts2LNo license0
RP2040/RP2350MainBoard2025
58.3 × 74.8 mm39 parts2LNo license0
AVR/ArduinoTailBoard2025
63 × 36.5 mm36 parts2LNo license0
RP2040/RP2350LoggerBoard2025
78.2 × 55.6 mm23 parts2LNo license0
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k