HardLabs

Meme shield 2019

ParadigmHyperloop·comp5-electrical·meme_shield_2019/meme_shield_2019.kicad_pcb

Meme shield 2019 layout, top view — open source AVR/Arduino board by ParadigmHyperloop
Simulate this board

About the Meme shield 2019

Meme shield 2019 is an open source AVR/Arduino PCB design by ParadigmHyperloop, published on GitHub under the Custom license license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 8 components from 5 distinct parts.

Its main chip is the Arduino_1pin, from the AVR/Arduino family.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

All schematics and layouts in KiCad, plus some simulations https://paradigmhyperloop.com

In summary, (you still need to read the whole thing), these boards are for Paradigm, and Paradigm only. It is shared with the world for the benefit of observers and potential Paradigm team members. If you wish to utilize these designs in any way, you must contact us first and receive written permission to utilize the designs for the purpose you require.

We don't want to be restrictive, and we will almost certainly grant you permission, but we want to know what you are using our designs for, and we want to make sure you are using them correctly and safely.

Meme shield 2019 bill of materials (BOM)

8 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Power
P1
1
Analog
P2
1
Digital
P3
1
Digital
P4
4
CONN_01X01
P5, P6, P7, P8

Meme shield 2019 design files

The KiCad project lives in the ParadigmHyperloop/comp5-electrical repository on GitHub; these links point at the commit this page was built from.

Meme shield 2019: common questions

What microcontroller does the Meme shield 2019 use?

The Meme shield 2019 is built around the Arduino_1pin, from the AVR/Arduino family.

How big is the Meme shield 2019?

The Meme shield 2019 measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Meme shield 2019?

8 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Meme shield 2019 design files?

From the ParadigmHyperloop/comp5-electrical repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Meme shield 2019 design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Meme shield 2019 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in comp5-electrical

Similar boards