Gotek remote

partlyhuman·gotek-remote·pcb/gotek-breakout.kicad_pcb

Gotek remote PCB layout, top view — open source board by partlyhuman

About the Gotek remote PCB

Gotek remote is an open source PCB design by partlyhuman, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 20 mm, with 12 components from 11 distinct parts.

By type, the board carries 9 connectors, 1 diode, 1 capacitor and 1 resistor.

It belongs with the dev boards & breakouts and displays & leds designs in this gallery.

From the project

A remote interface for the Gotek floppy emulator connected by a thin FFC

This is a device that relocates the USB, screen, and dial of a Gotek floppy drive emulator (running FlashFloppy) to a standalone unit you can build yourself. It solves the problem of not having easy access to the drive, for example if your computer's front panel doesn't have a cutout for it. The remote connects to the main unit via a flat flex cable (FFC) which can be threaded through the narrowest of cracks in a desktop chassis, giving you the freedom to place it wherever you prefer.

Gotek remote, from the project README
From the project README

Gotek remote bill of materials (BOM)

12 components, 11 distinct parts.

QtyPartRefs
2
FFC 10x1 0.5mm
J1, J10
1
USB_A
J2
1
OLED
J3
1
Encoder
J4
1
J7 Right Angle Connector
J7
1
J8 Mirror
J8
1
USB Breakout
J11
1
Activity LED Cathode
J12
1
LED
D11
1
22u
C1
1
10K
R11

Gotek remote design files

The KiCad project lives in the partlyhuman/gotek-remote repository on GitHub; these links point at the commit this page was built from.

Gotek remote: common questions

How big is the Gotek remote PCB?

The Gotek remote measures 100 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Gotek remote?

12 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gotek remote design files?

From the partlyhuman/gotek-remote repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Gotek remote design in my own project?

Yes, under the terms of its MIT license, which partlyhuman chose for the repository.

Similar boards