QSC-RW
About the QSC-RW PCB
QSC-RW is an open source PCB design by partlyhuman, published on GitHub under the MIT license. It is a 4-layer board measuring 55 × 33.1 mm, with 4 components from 4 distinct parts.
Other key parts include the SST39SF040. By type, the board carries 1 IC, 1 connector, 1 capacitor and 1 resistor.
From the project
Hardware and Software for the Suzuki Q-Chord
Things that work with the Suzuki QChord, primarily a reproduction QCard that can be built with completely off-the-shelf parts. These projects are under active development.
You can get one as long as stock lasts at my Ko-Fi shop!
A single cartridge that contains the entire Q-Card library, selectable by dip switches. The flash should be programmed prior to assembly, by concatenating the 4Mbit dumps you can find on archive.org.
Main components on the QSC-RW
QSC-RW bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SST39SF040 | SST39SF040-55-4C-WHE-T | U1 |
| 1 | QCard_Conn | REB_EdgeConnector_36pin | J1 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
QSC-RW design files
The KiCad project lives in the partlyhuman/qchord repository on GitHub; these links point at the commit this page was built from.
QSC-RW: common questions
How big is the QSC-RW PCB?
The QSC-RW measures 55 × 33.1 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the QSC-RW?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the QSC-RW design files?
From the partlyhuman/qchord repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the QSC-RW design in my own project?
Yes, under the terms of its MIT license, which partlyhuman chose for the repository.
