89 open source boards using the SST39SF040

Real designs built with the SST39SF040, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

89 boardsClear filters|Most starred

How designs wire the SST39SF040

Read from the KiCad layouts of 63 open source designs, one per repository: what each pin of the SST39SF040 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 26 of 61 designs, most often 100 nF.
GNDpin 16Connected to: GND 90%
VCCpin 32Connected to: VCC 93%
  • Decoupling capacitor on 43% · 100 nF (21)

30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Easy z80 by skiselev, Isa8 eth by skiselev and Mackerel-08 SBC v1 by crmaykish.

The SST39SF040 in open source designs

The gallery holds 89 open source boards using the SST39SF040 from 64 GitHub repositories; a typical one measures about 101.6 × 80.9 mm and carries around 36 components.

69% are two-layer designs, the rest use four layers or more, and 49% carry an open source license.

The most starred is Omega-Mainboard by skiselev.

Microcontrollers on boards using the SST39SF040

SST39SF040: common questions

Where can I find a SST39SF040 reference design?

Each of the 89 boards on this page is a real design using the SST39SF040. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SST39SF040 VCC pin?

The VCC pin has a decoupling capacitor on 26 of 61 designs, most often 100 nF. Counted from the KiCad layouts of 63 open source designs using the SST39SF040.

What parts are used alongside the SST39SF040?

The AS6C4008, AS6C4008-55PCN, 74HC245, 74HCT273 and RTL8019AS appear in the most repositories here.

Which microcontrollers do boards using the SST39SF040 use?

Most are built on AVR/Arduino (6) and PIC (4).

How big is a typical board using the SST39SF040?

The median is 101.6 × 80.9 mm, and 69% are two-layer designs.

What is the most popular open source board using the SST39SF040?

By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.

Can I simulate one of these boards using the SST39SF040 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part