SensorCalibrationBoard
About the SensorCalibrationBoard PCB
SensorCalibrationBoard is an open source PCB design by paulbuzzby, published on GitHub. It is a 2-layer board measuring 18 × 35 mm, with 13 components from 12 distinct parts.
By type, the board carries 6 resistors, 2 LEDs, 2 capacitors and 1 connector.
From the project
Here are different sets of PCBs for various Micro Mouse applications
Some of these boards (MouseSMDUKMARSAdvancedBoard and MouseMainboardTemplate) started as UKMARS boards that can be found Here
All credit to Peter Harrison for the original design of these boards
Circuit design for the other boards is credited to Duncan Louttit
SensorCalibrationBoard bill of materials (BOM)
13 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_06SILK_FEMALE_PTH Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | PMV45EN2 | SOT-23_Handsoldering | FET1 |
| 1 | BC849 | SOT-23_Handsoldering | TR1 |
| 1 | TLCR5800 | LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | LED1 |
| 1 | BPW96B | LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | PD2 |
| 2 | 10UF 10uF | C_0805_2012Metric | C1, C2 |
| 1 | 220R | R_0805_2012Metric | R1 |
| 1 | 220R 100K | R_0805_2012Metric | R2 |
| 1 | 100K 10R | R_0805_2012Metric | R3 |
| 1 | 100K R56 | R_0805_2012Metric | R4 |
| 1 | 10R R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | R56 220R | R_0805_2012Metric | R6 |
SensorCalibrationBoard design files
The KiCad project lives in the paulbuzzby/Micromouseboards repository on GitHub; these links point at the commit this page was built from.
SensorCalibrationBoard: common questions
How big is the SensorCalibrationBoard PCB?
The SensorCalibrationBoard measures 18 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SensorCalibrationBoard?
13 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SensorCalibrationBoard design files?
From the paulbuzzby/Micromouseboards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SensorCalibrationBoard design in my own project?
The repository has no license, so all rights stay with paulbuzzby. Use it as a reference, and ask the author before reusing the design.
More boards in Micromouseboards
AVR/ArduinoSSEverythingMainBoardv2
99.1 × 81.3 mm63 parts4LNo license0
SSChassisAndSensorBoard
99.1 × 81.3 mm48 parts2LNo license0
SS Wall Sensor Board
80 × 35.3 mm36 parts2LNo license0
UKMARSBOT Advanced Board with SMD
80 × 27.3 mm33 parts2LNo license0
SSChassisBoard
99.1 × 81.3 mm17 parts2LNo license0
MouseSMDSensorBoard
18 × 35 mm14 parts2LNo license0
MouseLedSensorMainBoard
23 × 33 mm13 parts2LNo license0
AVR/ArduinoGeminiArduinoMez
62.6 × 81.3 mm9 parts2LNo license0
Mainboard
99.1 × 81.3 mm9 parts2LNo license0
AVR/ArduinoSSMezBoard
30 × 60 mm9 parts2LNo license0
MouseLedSensorDaughterBoard
13 × 25 mm4 parts2LNo license0