GeminiArduinoMez
About the GeminiArduinoMez PCB
GeminiArduinoMez is an open source AVR/Arduino PCB design by paulbuzzby, published on GitHub. It is a 2-layer board measuring 62.6 × 81.3 mm, with 9 components from 8 distinct parts.
Its main chip is the ARDUINO_NANO_RP2040_CONNECT, from the AVR/Arduino family. By type, the board carries 3 connectors, 3 resistors, 1 module, 1 switch and 1 diode.
From the project
Here are different sets of PCBs for various Micro Mouse applications
Some of these boards (MouseSMDUKMARSAdvancedBoard and MouseMainboardTemplate) started as UKMARS boards that can be found Here
All credit to Peter Harrison for the original design of these boards
Circuit design for the other boards is credited to Duncan Louttit
Main components on the GeminiArduinoMez
GeminiArduinoMez bill of materials (BOM)
9 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ARDUINO_NANO_RP2040_CONNECT Arduino_Nano_RP2040_Connect | Arduino_Nano | A1 |
| 1 | CONN_06SILK_FEMALE_PTH Conn_01x16 | PinHeader_1x16_P2.54mm_Vertical | J1 |
| 2 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J3, J4 |
| 1 | TACT_SW | SW_PUSH_6mm | SW1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 220R 680R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 220R 180K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 100K 68K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
GeminiArduinoMez design files
The KiCad project lives in the paulbuzzby/Micromouseboards repository on GitHub; these links point at the commit this page was built from.
GeminiArduinoMez: common questions
What microcontroller does the GeminiArduinoMez use?
The GeminiArduinoMez is built around the ARDUINO_NANO_RP2040_CONNECT, from the AVR/Arduino family.
How big is the GeminiArduinoMez PCB?
The GeminiArduinoMez measures 62.6 × 81.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GeminiArduinoMez?
9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GeminiArduinoMez design files?
From the paulbuzzby/Micromouseboards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GeminiArduinoMez design in my own project?
The repository has no license, so all rights stay with paulbuzzby. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the GeminiArduinoMez without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Micromouseboards
AVR/ArduinoSSEverythingMainBoardv2
99.1 × 81.3 mm63 parts4LNo license0
SSChassisAndSensorBoard
99.1 × 81.3 mm48 parts2LNo license0
SS Wall Sensor Board
80 × 35.3 mm36 parts2LNo license0
UKMARSBOT Advanced Board with SMD
80 × 27.3 mm33 parts2LNo license0
SSChassisBoard
99.1 × 81.3 mm17 parts2LNo license0
MouseSMDSensorBoard
18 × 35 mm14 parts2LNo license0
SensorCalibrationBoard
18 × 35 mm13 parts2LNo license0
MouseLedSensorMainBoard
23 × 33 mm13 parts2LNo license0
AVR/ArduinoSSMezBoard
30 × 60 mm9 parts2LNo license0
Mainboard
99.1 × 81.3 mm9 parts2LNo license0
MouseLedSensorDaughterBoard
13 × 25 mm4 parts2LNo license0
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746