SSEverythingMainBoardv2

paulbuzzby·Micromouseboards·SSEverythingMainBoardv2/SSEverythingMainBoardv2.kicad_pcb

About the SSEverythingMainBoardv2 PCB

SSEverythingMainBoardv2 is an open source AVR/Arduino PCB design by paulbuzzby, published on GitHub. It is a 4-layer board measuring 99.1 × 81.3 mm, with 63 components from 31 distinct parts.

Its main chip is the ARDUINO_NANO_RP2040_CONNECT, from the AVR/Arduino family. Other key parts include the DFRobot_DC_Controller. By type, the board carries 25 resistors, 10 capacitors, 8 LEDs, 6 connectors, 4 transistors and 3 modules.

From the project

Here are different sets of PCBs for various Micro Mouse applications

Some of these boards (MouseSMDUKMARSAdvancedBoard and MouseMainboardTemplate) started as UKMARS boards that can be found Here

All credit to Peter Harrison for the original design of these boards

Circuit design for the other boards is credited to Duncan Louttit

Main components on the SSEverythingMainBoardv2

DFRobot_DC_ControllerARDUINO_NANO_RP2040_CONNECT

SSEverythingMainBoardv2 bill of materials (BOM)

63 components, 31 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	DFRobot_DC_Controller	DFRobot_DC_Controller	U1
1	ARDUINO_NANO_RP2040_CONNECT Arduino_Nano_RP2040_Connect	Arduino_Nano	A1
1	Left MOTOR	MINI-METAL-GEARMOTOR-WITH-BRACKET	M1
1	Right MOTOR	MINI-METAL-GEARMOTOR-WITH-BRACKET_Alt	M2
4	PBSS4160DS	SOT95P275X110-6N	Q1, Q2, Q3, Q4
2	CONN_06SILK_FEMALE_PTH	1X06_LOCK_LONGPADS	J1, J2
1	Switch	PinHeader_1x02_P2.54mm_Vertical	J4
1	Conn_01x02	PinHeader_1x02_P2.54mm_Vertical	J5
1	Conn_01x05	PinSocket_1x05_P2.54mm_Vertical	J6
1	Conn_01x03	JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical	J8
2	GROUND	PinHeader_1x01_P2.54mm_Vertical	GROUND1, GROUND2
1	TACT_SW	SW_PUSH_6mm	SW1
4	TLCR5800	LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm	FLLED1, FRLED2, LDLED1, RDLED2
4	BPW96B	LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm	LDPD1, LFPD1, RDPD1, RFPD1
3	LED	LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder	D3, D4, D5
5	10UF 10uF	C_1206_3216Metric_Pad1.33x1.80mm_HandSolder	C1, C2, C3, C5, C9
2	330uF, 16V	C_Radial_D6.3mm_H7.0mm_P2.50mm	C4, C6
3	0.1UF 10uF	C_1206_3216Metric_Pad1.33x1.80mm_HandSolder	C7, C8, C10
2	220R 1K	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R1, R2
2	100K	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R3, R4

Show 11 more

Qty	Part	Footprint	Refs
2	10R 100R	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R5, R7
2	R56 4R7	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R6, R8
4	2K2	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R9, R10, R11, R13
2	220R	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R12, R14
2	100R	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R15, R22
2	4R7	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R16, R23
2	1K	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R17, R18
1	180K 1K	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R19
1	68K 1K	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R20
1	1K0	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R21
2	220R	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R24, R25

SSEverythingMainBoardv2 design files

The KiCad project lives in the paulbuzzby/Micromouseboards repository on GitHub; these links point at the commit this page was built from.

SSEverythingMainBoardv2: common questions

What microcontroller does the SSEverythingMainBoardv2 use?

The SSEverythingMainBoardv2 is built around the ARDUINO_NANO_RP2040_CONNECT, from the AVR/Arduino family.

How big is the SSEverythingMainBoardv2 PCB?

The SSEverythingMainBoardv2 measures 99.1 × 81.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SSEverythingMainBoardv2?

63 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SSEverythingMainBoardv2 design files?

From the paulbuzzby/Micromouseboards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SSEverythingMainBoardv2 design in my own project?

The repository has no license, so all rights stay with paulbuzzby. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SSEverythingMainBoardv2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.