SwarmB3
paulodowd·SwarmB3·pcb/SwarmB3_pcb/SwarmB3_pcb.kicad_pcb
About the SwarmB3 PCB
SwarmB3 is an open source PCB design by paulodowd, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 81.7 × 72.1 mm, with 54 components from 25 distinct parts.
Other key parts include the 74HC14 and 74LS08. By type, the board carries 16 resistors, 10 connectors, 7 diodes, 6 transistors, 2 ICs and 2 capacitors.
From the project
Working on Swarm Board version 3... so I decided the tinkering hadn't finished yet :)
Working on Swarm Board version 3... so I decided the tinkering hadn't finished yet :)
Currently work in progress. - PCB in testing, version 4. - Initial code drafted but a mess.
14/04/26: Lots and lots of debugging between hardware and software. The pcb design worked on the assumption that the UART tx could be inverted in software, as stated in the SAMD51 datasheet. However, it doesn't work as I expected. It seems to invert the data, but the idle state remains high. This causes issues for IR communication because I don't want to saturate the environment with the carrier wave whilst…
Main components on the SwarmB3
SwarmB3 bill of materials (BOM)
54 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC14 | DIP-14_W7.62mm_Socket | U1 |
| 1 | 74LS08 | DIP-14_W7.62mm_Socket | U2 |
| 4 | PN2222A | TO-92_Inline | Q1, Q2, Q3, Q5 |
| 2 | 2N7000 | TO-92_Inline | Q7, Q8 |
| 1 | 5V_3PI 5v_3Pi | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | GND_3PI GND_3Pi | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | I2C_3V3_EXP I2C_3V3_Exp | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | CONN_02X15_M5STACK_CORE2 Conn_02x15_M5Stack_Core2 | PinHeader_2x15_P2.54mm_Vertical | J4 |
| 1 | I2C_3PI I2C_3Pi | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | 3PI_SWTCH | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | ProxA | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | ProxB | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | ItsyBitsyRight | PinHeader_1x14_P2.54mm_Vertical | J10 |
| 1 | ItsyBitsyLeft | PinHeader_1x14_P2.54mm_Vertical | J11 |
| 2 | Bttn | SW_PUSH_6mm | PWR1, RESET1 |
| 4 | TSDP34138 | Vishay_MOLD-3Pin | UD_1, UD_2, UD_3, UD_4 |
| 4 | 5K_Pot_IRLED | Potentiometer_Bourns_3386P_Vertical | VR2_A1, VR3_A1, VR4_A1, VR_1A1 |
| 1 | IR_LED | LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D_1A1 |
| 7 | IR_LED | LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D1_B1, D2_A1, D2_B1, D3_A1, D3_B1, D4_A1, D4_B1 |
| 2 | 0.1UF 0.1uF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 82R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R9, R10, R13 |
| 3 | LDR | R_LDR_5.0x4.1mm_P3mm_Vertical | R2, R3, R6 |
| 3 | 10K_LDR | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R5, R7 |
| 4 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R15, R16, R17, R18 |
| 2 | 4K7 4k7 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R19, R20 |
SwarmB3 design files
The KiCad project lives in the paulodowd/SwarmB3 repository on GitHub; these links point at the commit this page was built from.
SwarmB3: common questions
How big is the SwarmB3 PCB?
The SwarmB3 measures 81.7 × 72.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SwarmB3?
54 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SwarmB3 design files?
From the paulodowd/SwarmB3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SwarmB3 design in my own project?
Yes, under the terms of its GPL-3.0 license, which paulodowd chose for the repository.