HardLabs

PCB ATCE

Pauloux·Projet-ATCE·PCB/PCB 2 couches/PCB ATCE.kicad_pcb

PCB ATCE layout, top view — open source AVR/Arduino board by Pauloux

About the PCB ATCE

PCB ATCE is an open source AVR/Arduino PCB design by Pauloux, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40.3 × 33.3 mm, with 25 components from 15 distinct parts.

Its main chip is the TQFP-44_10x10mm_P0.8mm, from the AVR/Arduino family. By type, the board carries 10 capacitors, 6 resistors, 2 ICs, 2 connectors, 2 switches and 1 crystal.

From the project

Projet du cours ATCE portant sur l'asservissement d'un oscillateur à quartz

PCB ATCE bill of materials (BOM)

25 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
~
U2
1
16MHZ
16MHz
Y1
1
USB_OTG
J1
1
Conn_Coaxial
J2
1
~
BB833
2
SW_Push
SW1, SW2
1
10U
10u
L1
1
15P
15p
C1
1
10P
10p
C2
2
1u
C3, C4
6
10U
10u
C5, C6, C7, C8, C9, C10
2
0
R1, R6
2
22
R2, R3
2
5k
R4, R5

PCB ATCE design files

The KiCad project lives in the Pauloux/Projet-ATCE repository on GitHub; these links point at the commit this page was built from.

PCB ATCE: common questions

What microcontroller does the PCB ATCE use?

The PCB ATCE is built around the TQFP-44_10x10mm_P0.8mm, from the AVR/Arduino family.

How big is the PCB ATCE?

The PCB ATCE measures 40.3 × 33.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB ATCE?

25 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB ATCE design files?

From the Pauloux/Projet-ATCE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB ATCE design in my own project?

Yes, under the terms of its GPL-3.0 license, which Pauloux chose for the repository.

Can I test firmware for the PCB ATCE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Projet-ATCE

Similar boards