Shield
pbrook·minicube·hardware/shield.kicad_pcb
About the Shield
Shield is an open source PCB design by pbrook, published on GitHub. It is a 2-layer board measuring 85.1 × 83.8 mm, with 46 components from 21 distinct parts.
Other key parts include the 74HCT138. By type, the board carries 20 connectors, 12 resistors, 8 transistors, 3 diodes, 2 capacitors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Surface mount LED cube
Main components on the Shield
Shield bill of materials (BOM)
46 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HCT138 | DIP-16__300_ELL | U1 |
| 8 | MOS_P | SOT23GDS_NP | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | D0_7 | SIL-8-ELL | P1 |
| 1 | D8_13 | SIL-10-ELL | P2 |
| 1 | POWER | SIL-8-ELL | P3 |
| 1 | A0_5 | SIL-6-ELL | P4 |
| 1 | BOARD | SIL-12-ELL | P6 |
| 8 | CONN_1 | SIL-1 | P7, P8, P9, P10, P11, P12, P13, P14 |
| 4 | CONN_1 | HOLE3 | P15, P16, P17, P18 |
| 1 | EXT1 | SIL-8-ELL | P20 |
| 1 | ADDR_EXT | SIL-6-ELL | P21 |
| 1 | EXT2 | SIL-8-ELL | P22 |
| 1 | DIODESCH | D5 | D1 |
| 1 | DIODESCH | DO-41 | D2 |
| 1 | DIODE | DO-41 | D3 |
| 1 | 100n | C1 | C1 |
| 1 | 2200u | CPR10X20 | C3 |
| 8 | R | 0805 | R1, R2, R3, R4, R5, R6, R7, R8 |
| 1 | 10k | R3-LARGE_PADS | R9 |
| 1 | 22k | R3-LARGE_PADS | R10 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | R | R3-LARGE_PADS | R11, R12 |
Shield design files
The KiCad project lives in the pbrook/minicube repository on GitHub; these links point at the commit this page was built from.
Shield: common questions
How big is the Shield?
The Shield measures 85.1 × 83.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Shield?
46 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Shield design files?
From the pbrook/minicube repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Shield design in my own project?
The repository has no license, so all rights stay with pbrook. Use it as a reference, and ask the author before reusing the design.
More boards in minicube
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979