ESP32-epaper adapter
About the ESP32-epaper adapter PCB
ESP32-epaper adapter is an open source PCB design by pcbreflux, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 23 × 29 mm, with 20 components from 12 distinct parts.
By type, the board carries 10 capacitors, 4 diodes, 2 connectors, 2 resistors, 1 transistor and 1 inductor.
It belongs with the displays & leds designs in this gallery.
From the project
all espressif stuff will committed here
ESP32 ePaper Adapter ===========================
This project uses information from this Project:
http://www.jsykora.info/2014/06/epd-display-working/
http://www.jsykora.info/2014/04/mailbag-epaper-display-module/
see also https://github.com/jsyk/PIP-Watch/blob/master/License_Hardware.txt
Files using the KiCad development version!
ESP32-epaper adapter bill of materials (BOM)
20 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SI1308EDL | sot323 | Q1 |
| 1 | CONN_01X08 | Pin_Header_Straight_1x08_Pitch2.54mm | J1 |
| 1 | MOLEX_FPC_RCPT_24POS | MOLEX_FPC_RCPT_24POS_0_5MM | P1 |
| 1 | BAT30SWFILM | sot323 | D1 |
| 3 | MBR0530 | sod123 | D2, D3, D4 |
| 1 | 68u | inductor_smd_4mmx4mm | L1 |
| 1 | 4u7/6V | c_0805 | C1 |
| 1 | 4u7/50V | c_0805 | C2 |
| 7 | 1u/50V | c_0805 | C3, C5, C6, C7, C8, C9, C10 |
| 1 | 2u2/50V | c_0805 | C4 |
| 1 | 3R | r_0805 | R1 |
| 1 | 10k | r_0805 | R2 |
ESP32-epaper adapter design files
The KiCad project lives in the pcbreflux/espressif repository on GitHub; these links point at the commit this page was built from.
ESP32-epaper adapter: common questions
How big is the ESP32-epaper adapter PCB?
The ESP32-epaper adapter measures 23 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-epaper adapter?
20 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-epaper adapter design files?
From the pcbreflux/espressif repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ESP32-epaper adapter design in my own project?
Yes, under the terms of its GPL-3.0 license, which pcbreflux chose for the repository.
More boards in espressif
ESP32ESP32-li ion cell monitor pan
94 × 26 mm47 parts2LGPL-3.0608
ESP32ESP32-li ion cell monitor
90 × 26 mm45 parts2LGPL-3.0608
ESP32ESP32-bat monitor latch
33 × 50 mm29 parts2LGPL-3.0608
ESP32ESP32-bat monitor latch pan
66 × 100 mm29 parts2LGPL-3.0608
ESP32ESP32-adapter
68 × 55.4 mm26 parts2LGPL-3.0608
ESP32ESP32-adapter pan woom
97.4 × 95.9 mm26 parts2LGPL-3.0608
ESP32ESP32-adapter pan
97.4 × 96.6 mm26 parts2LGPL-3.0608
ESP32-epaper adapter pan
23 × 29 mm20 parts2LGPL-3.0608
ESP32ESP32-adapter pan esp3212
97 × 94.7 mm13 parts2LGPL-3.0608
ESP32ESP32-wroover adapter
27 × 37 mm6 parts2LGPL-3.0608
ESP32ESP32-wroover adapter pan
37 × 81 mm6 parts2LGPL-3.0608
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k