ESP32-wroover adapter
About the ESP32-wroover adapter PCB
ESP32-wroover adapter is an open source ESP32 PCB design by pcbreflux, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 27 × 37 mm, with 6 components from 4 distinct parts.
Its main chip is the ESP32-WROVER, from the ESP32 family. By type, the board carries 2 connectors, 2 switches, 1 IC and 1 resistor.
From the project
all espressif stuff will committed here
Main components on the ESP32-wroover adapter
ESP32-wroover adapter bill of materials (BOM)
6 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROVER | ESP32-WROVER-short | U1 |
| 2 | CONN_01X14 | Pin_Header_Straight_1x14_Pitch2.54mm | J1, J2 |
| 2 | SW_PUSH | smd_push | SW1, SW2 |
| 1 | 100K | r_0603 | R1 |
ESP32-wroover adapter design files
The KiCad project lives in the pcbreflux/espressif repository on GitHub; these links point at the commit this page was built from.
ESP32-wroover adapter: common questions
What microcontroller does the ESP32-wroover adapter use?
The ESP32-wroover adapter is built around the ESP32-WROVER, from the ESP32 family.
How big is the ESP32-wroover adapter PCB?
The ESP32-wroover adapter measures 27 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-wroover adapter?
6 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-wroover adapter design files?
From the pcbreflux/espressif repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ESP32-wroover adapter design in my own project?
Yes, under the terms of its GPL-3.0 license, which pcbreflux chose for the repository.
Can I test firmware for the ESP32-wroover adapter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in espressif
ESP32ESP32-li ion cell monitor pan
94 × 26 mm47 parts2LGPL-3.0608
ESP32ESP32-li ion cell monitor
90 × 26 mm45 parts2LGPL-3.0608
ESP32ESP32-bat monitor latch
33 × 50 mm29 parts2LGPL-3.0608
ESP32ESP32-bat monitor latch pan
66 × 100 mm29 parts2LGPL-3.0608
ESP32ESP32-adapter pan woom
97.4 × 95.9 mm26 parts2LGPL-3.0608
ESP32ESP32-adapter pan
97.4 × 96.6 mm26 parts2LGPL-3.0608
ESP32ESP32-adapter
68 × 55.4 mm26 parts2LGPL-3.0608
ESP32-epaper adapter
23 × 29 mm20 parts2LGPL-3.0608
ESP32-epaper adapter pan
23 × 29 mm20 parts2LGPL-3.0608
ESP32ESP32-adapter pan esp3212
97 × 94.7 mm13 parts2LGPL-3.0608
ESP32ESP32-wroover adapter pan
37 × 81 mm6 parts2LGPL-3.0608
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k