Parallel Floppy Cable to C64 Userport Adapter

pdaehne·C64-Parallel-Floppy-Cable·Parallel-Adapter-C64-C128/Parallel-Adapter-C64.kicad_pcb

Parallel Floppy Cable to C64 Userport Adapter PCB layout, top view — open source board by pdaehne

About the Parallel Floppy Cable to C64 Userport Adapter PCB

Parallel Floppy Cable to C64 Userport Adapter is an open source PCB design by pdaehne, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 59 × 31 mm, with 5 components from 4 distinct parts.

By type, the board carries 2 connectors, 2 capacitors and 1 switch.

It belongs with the retro computing designs in this gallery.

From the project

KiCad Project and Gerbers for C64 parallel Floppy cable adapters

This repository contains the KiCad project and Gerber files for an adapter that allows to connect a parallel floppy cable to the C64 or C128 userport. It also features a reset button. The connection between floppy and C64/C128 is done with a 10-wire ribbon cable with the following pinout:

The subdirectory "gerber-files" contains a Zip file you can use to order the PCB from PCB manufacturers like PCBWay or JLCPCB. Simply upload the Zip on their web page. I recommend to use the standard PCB thickness of 1.6mm and HASL finishing.

Parallel Floppy Cable to C64 Userport Adapter, from the project README
From the project README

Parallel Floppy Cable to C64 Userport Adapter bill of materials (BOM)

5 components, 4 distinct parts.

QtyPartRefs
1
C64_Userport
J1
1
Connection to 1541
J2
1
Reset
SW1
2
220pF
C1, C2

Parallel Floppy Cable to C64 Userport Adapter design files

The KiCad project lives in the pdaehne/C64-Parallel-Floppy-Cable repository on GitHub; these links point at the commit this page was built from.

Parallel Floppy Cable to C64 Userport Adapter: common questions

How big is the Parallel Floppy Cable to C64 Userport Adapter PCB?

The Parallel Floppy Cable to C64 Userport Adapter measures 59 × 31 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Parallel Floppy Cable to C64 Userport Adapter?

5 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Parallel Floppy Cable to C64 Userport Adapter design files?

From the pdaehne/C64-Parallel-Floppy-Cable repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Parallel Floppy Cable to C64 Userport Adapter design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in C64-Parallel-Floppy-Cable

Similar boards