ExtDE0 7Seg
Peace-ADIKEPETO·ExtDE0_7Seg-KiCad
About the ExtDE0 7Seg PCB
ExtDE0 7Seg is an open source PCB design by Peace-ADIKEPETO, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 113.7 × 79.3 mm, with 77 components from 12 distinct parts.
Other key parts include the CC56-12EWA. By type, the board carries 41 resistors, 16 transistors, 12 diodes, 6 switches, 1 IC and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
KiCad port of the EPFL/LAP ExtDE0_7Seg extension board for the Terasic DE0 FPGA: 4-digit 7-segment display, DIP switches, buttons and joystick. Through-hole rework, built as a two-board single-sided sandwich PCB. Not yet fabricated or tested.
Extension board for the Terasic DE0 FPGA board: 4-digit 7-segment display, 8 DIP switches with LEDs, 4 push buttons with LEDs, and a 5-way joystick, all connected through the DE0 40-pin GPIO header.
This repository is a KiCad re-capture and rework of the original EPFL/LAP design, adapted to parts that are easy to source in Benin and to a home-made fabrication process.

Main components on the ExtDE0 7Seg
ExtDE0 7Seg bill of materials (BOM)
77 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CC56-12EWA | CA56-12EWA | U1 |
| 12 | IRF9520 | TO-220-3_Vertical | Q1, Q6, Q7, Q8, Q9, Q10, Q11, Q12 +4 |
| 4 | 2N7000 | TO-92_Inline | Q2, Q3, Q4, Q5 |
| 1 | CONN_02X20_ODD_EVEN Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | SW_DIP_X08 SW_DIP_x08 | SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW1 |
| 4 | SW_Push | SW_PUSH_6mm | SW2, SW3, SW4, SW5 |
| 1 | SMD-BUTTON_6P-10X10X8.6MM_ | SW6-3.25-10X10X8.6MM | SW6 |
| 12 | LED | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 16 | 330R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +8 |
| 4 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R11, R12 |
| 12 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14, R15, R17, R19, R21, R23, R25, R27 +4 |
| 9 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R30, R31, R33, R35, R37, R38, R39, R40 +1 |
ExtDE0 7Seg design files
The KiCad project lives in the Peace-ADIKEPETO/ExtDE0_7Seg-KiCad repository on GitHub; these links point at the commit this page was built from.
- Layout7Seg_Ext.kicad_pcb
- Schematic7Seg_Ext.kicad_sch
- BOM7Seg_Ext.csv
ExtDE0 7Seg: common questions
How big is the ExtDE0 7Seg PCB?
The ExtDE0 7Seg measures 113.7 × 79.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ExtDE0 7Seg?
77 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ExtDE0 7Seg design files?
From the Peace-ADIKEPETO/ExtDE0_7Seg-KiCad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ExtDE0 7Seg design in my own project?
Yes, under the terms of its GPL-2.0 license, which Peace-ADIKEPETO chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k