Programador-NFC
pedrotrenado·programador-NFC·hardware/PCB_35x25_8Vueltas/NFC_Programmer.kicad_pcb
About the Programador-NFC PCB
Programador-NFC is an open source PCB design by pedrotrenado, published on GitHub. It is a 2-layer board measuring 40 × 56.1 mm, with 35 components from 14 distinct parts.
Other key parts include the MFRC63002HN,151. By type, the board carries 17 capacitors, 7 resistors, 4 jumpers, 3 connectors, 2 inductors and 1 IC.
It belongs with the usb & debug tools designs in this gallery.
From the project
Este proyecto tiene como objetivo el diseño e implementación de un sistema electrónico para la actualización del firmware de sensores a través de la tecnología NFC (Near Field Communication).

Main components on the Programador-NFC
Programador-NFC bill of materials (BOM)
35 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MFRC63002HN,151 | MFRC630_MOUSER | U1 |
| 1 | Crystal_GND24 | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 4 | SolderJumper_3_Bridged12 | SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabels | JP1, JP2, JP3, JP4 |
| 2 | TBD | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1, L2 |
| 2 | 470n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3 |
| 3 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C5 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 2 | 10p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 8 | TBD | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10, C11, C12, C13, C15, C16, C17 |
| 1 | C | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 6 | TBD | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5, R6, R7 |
Programador-NFC design files
The KiCad project lives in the pedrotrenado/programador-NFC repository on GitHub; these links point at the commit this page was built from.
Programador-NFC: common questions
How big is the Programador-NFC PCB?
The Programador-NFC measures 40 × 56.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Programador-NFC?
35 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Programador-NFC design files?
From the pedrotrenado/programador-NFC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Programador-NFC design in my own project?
The repository has no license, so all rights stay with pedrotrenado. Use it as a reference, and ask the author before reusing the design.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389