Antenna
Penta0308·BikeRadar·RFB/Antenna/Antenna.kicad_pcb
About the Antenna PCB
Antenna is an open source PCB design by Penta0308, published on GitHub. It is a 4-layer board measuring 24.9 × 97.9 mm, with 25 components from 21 distinct parts.
Other key parts include the SKY67189-396LF and GRF2101. By type, the board carries 12 capacitors, 5 inductors, 3 resistors, 2 ICs, 2 connectors and 1 antenna.
It belongs with the rf & radio designs in this gallery.
Main components on the Antenna
Antenna bill of materials (BOM)
25 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SKY67189-396LF | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | IC2 |
| 1 | GRF2101 | DFN-6-1.5x1.5_1EP | U3 |
| 1 | Conn_Coaxial | U.FL_Molex_MCRF_73412-0110_Vertical | J1 |
| 1 | Conn_01x05_Male | PinSocket_1x05_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | Antenna | Antenna_PatchArray4_JLC7628_1.6_5800M | AE1 |
| 2 | BLM18PG181SN1D | L_0603_1608Metric | FB1, FB2 |
| 1 | 400p R | L_0402_1005Metric | L1 |
| 1 | 6n8 | L_0402_1005Metric | L2 |
| 1 | 2n4 R | L_0402_1005Metric | L3 |
| 3 | 100n | C_0402_1005Metric | C1, C3, C6 |
| 2 | 10u | C_0603_1608Metric | C2, C13 |
| 1 | 0.5p R | C_0402_1005Metric | C4 |
| 1 | 22p R | C_0402_1005Metric | C5 |
| 1 | 4p3 R | C_0402_1005Metric | C8 |
| 1 | 0.4p R | C_0402_1005Metric | C9 |
| 1 | 5p6 | C_0402_1005Metric | C10 |
| 1 | 2p2 R | C_0402_1005Metric | C11 |
| 1 | 4u7 | C_0603_1608Metric | C12 |
| 1 | 3k | R_0402_1005Metric | R2 |
| 1 | 5k1 | R_0402_1005Metric | R3 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 20 | R_0402_1005Metric | R4 |
Antenna design files
The KiCad project lives in the Penta0308/BikeRadar repository on GitHub; these links point at the commit this page was built from.
- LayoutRFB/Antenna/Antenna.kicad_pcb
- SchematicRFB/Antenna/Antenna.kicad_sch
Antenna: common questions
How big is the Antenna PCB?
The Antenna measures 24.9 × 97.9 mm, has 4 copper layers and is 1.5878 mm thick.
How many components are on the Antenna?
25 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Antenna design files?
From the Penta0308/BikeRadar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Antenna design in my own project?
The repository has no license, so all rights stay with Penta0308. Use it as a reference, and ask the author before reusing the design.
More boards in BikeRadar
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568