Analog shield

perc-sw·analog_shield

Analog shield layout, top view — open source board by perc-sw

About the Analog shield

Analog shield is an open source PCB design by perc-sw, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 68.6 × 53.3 mm, with 43 components from 26 distinct parts.

Other key parts include the LMT84LPM and TLV2472AIP. By type, the board carries 18 resistors, 8 capacitors, 7 connectors, 4 jumpers, 3 diodes and 2 ICs.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

CAD files for the student workshop Analog Shield board.

This repository has all CAD files for the Analog Shield board used in the University of Toronto, Department of Physic, "Introduction to Electronics course."

This board is used to train graduate students first and foremost in through hole solder techniques. As part of the training in the course they will as learn analog front end, digital IO design methods as well. Other than a teaching aid there is not intended practical use for this board.

Analog shield, from the project README
From the project README

Main components on the Analog shield

LMT84LPMTLV2472AIP

Analog shield bill of materials (BOM)

43 components, 26 distinct parts.

QtyPartRefs
1
LMT84LPM
U1
1
TLV2472AIP
U2
1
640456-3
J1
1
S3B-EH(LF)(SN)
J2
2
M20-9770846
Conn_01x08
J3, J7
1
Conn_01x06
J4
1
Conn_01x10
J6
1
PPTC062LFBN-RC
J8
1
M20-9990345
Jumper_3_Bridged12
JP1
1
M20-9990345
Jumper_3_Open
JP2
2
Jumper_3_Open
JP3, JP4
1
3362P-1-103LF
10K
RV1
1
HLMP-1503-C0002
GREEN
D1
2
HLMP-1301-E0002
RED
D2, D3
2
K104Z15Y5VF5TL2
0.1µF
C1, C5
1
K104Z15Y5VF5TL2
1µF
C2
1
K223K15X7RF5TL2
2200pF
C3
1
K102J15C0GF5TL2
1000pF
C4
3
K103K15X7RF5TL2
10000pF
C6, C7, C8
1
MFR-25FBF52-16K9
16.9K
R1
Show 6 more
QtyPartRefs
1
MFR-25FBF52-680R
680
R2
5
MFR-25FTF52-10K
10K
R3, R5, R6, R13, R14
1
MFR-25FBF52-35K7
35.7K
R4
6
MFR-25FTF52-4K7
4.7K
R7, R8, R9, R16, R17, R18
3
MFR-25FTF52-1K
1K
R10, R11, R12
1
MFR-25FBF52-6K98
6.98K
R15

Analog shield design files

The KiCad project lives in the perc-sw/analog_shield repository on GitHub; these links point at the commit this page was built from.

Analog shield: common questions

How big is the Analog shield?

The Analog shield measures 68.6 × 53.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Analog shield?

43 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Analog shield design files?

From the perc-sw/analog_shield repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Analog shield design in my own project?

Yes, under the terms of its GPL-3.0 license, which perc-sw chose for the repository.

Similar boards