HardLabs

Stm32f429vit6 v1

pestvillian·ASAT·Touchscreen-Hardware/TouchscreenPCB-v1/stm32f429vit6_v1/stm32f429vit6_v1.kicad_pcb

Stm32f429vit6 v1 PCB layout, top view — open source STM32 board by pestvillian

About the Stm32f429vit6 v1 PCB

Stm32f429vit6 v1 is an open source STM32 PCB design by pestvillian, published on GitHub. It is a 4-layer board measuring 52 × 55 mm, with 39 components from 23 distinct parts.

Its main chip is the STM32F429VITx, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 18 capacitors, 6 connectors, 5 diodes, 5 resistors, 2 ICs and 1 crystal.

It belongs with the robotics & motion designs in this gallery.

From the project

ECE129 Repo

Automated Sample Agitation Transportation System

We are an Electrical Engineering Capstone group from the University of California, Santa Cruz. Our project aims to design a more efficient, more cost-effective solution for medical staff and researchers to process human samples for imaging.

Here is an overview of the file structure: - Five folders for each group member - "Motor-Controller-Board" contains PCB files for the Motor Controller PCB - "Touchscreen-Hardware" contains PCB files for the two revisions of the touchscreen PCB - "Firmware" contains the firmware for both PCBs

Main components on the Stm32f429vit6 v1

AMS1117-3.3STM32F429VITx

Stm32f429vit6 v1 bill of materials (BOM)

39 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F429VITx
U2
1
16MHz
Y1
1
Conn_01x04
J1
2
USB_B_Micro
J2, J4
1
Conn_01x06
J3
1
Conn_01x02
J5
1
2x17 odd-even connector
J6
1
SW_Push
SW1
2
RED
D1, D5
3
P6SMB6.8
D2, D3, D4
1
120R
FB1
7
100n
C1, C4, C6, C7, C9, C10, C14
2
10u
C2, C11
1
1u
C3
2
100n
C5, C8
2
22u
C12, C13
2
10p
C15, C16
1
2u2
C17
1
2u2
C18
Show 3 more
QtyPartRefs
2
1k
R1, R5
1
10k
R2
2
220R
R3, R4

Stm32f429vit6 v1 design files

The KiCad project lives in the pestvillian/ASAT repository on GitHub; these links point at the commit this page was built from.

Stm32f429vit6 v1: common questions

What microcontroller does the Stm32f429vit6 v1 use?

The Stm32f429vit6 v1 is built around the STM32F429VITx, from the STM32 family.

How big is the Stm32f429vit6 v1 PCB?

The Stm32f429vit6 v1 measures 52 × 55 mm, has 4 copper layers and is 1.645 mm thick.

How many components are on the Stm32f429vit6 v1?

39 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stm32f429vit6 v1 design files?

From the pestvillian/ASAT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Stm32f429vit6 v1 design in my own project?

The repository has no license, so all rights stay with pestvillian. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32f429vit6 v1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in ASAT

Similar boards