Test1
pginfinitylab-ai·forge·board/test1/test1.kicad_pcb
About the Test1 PCB
Test1 is an open source PCB design by pginfinitylab-ai, published on GitHub. It is a 2-layer board measuring 110 × 111 mm, with 114 components from 11 distinct parts.
Other key parts include the TL072CD. By type, the board carries 47 resistors, 40 capacitors, 6 connectors and 5 ICs.
From the project
UST Forge (formerly CircuitMind) is an engineering-grade AI-powered, end-to-end product engineering platform covering Electronics · Firmware · Mechanical · Simulation · Validation, designed to operate alongside KiCad 10.x, ngspice, Renode, FreeCAD, and Freerouting.
UST Forge (formerly CircuitMind) is an engineering-grade AI-powered, end-to-end product engineering platform covering Electronics · Firmware · Mechanical · Simulation · Validation, designed to operate alongside KiCad 10.x, ngspice, Renode, FreeCAD, and Freerouting.
It combines deterministic EDA analysis, native KiCad tooling, structured engineering knowledge, multi-plane design graphs, vector retrieval, and controlled execution to provide an AI-assisted hardware engineering environment.

Main components on the Test1
Test1 bill of materials (BOM)
114 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | TL072CD TEXAS INSTRUMENTS | SOIC127P600X175-8N | IC1, IC2, IC3, IC4, IC5 |
| 1 | USB4125-GF-A CH1 GCT | Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal | J1 |
| 1 | CLIFF_FC68148(DC-10A) Power CLIFF ELECTRONIC COMPONENTS | CLIFF_FC68148(DC-10A) | J5 |
| 4 | CH1 | Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal | J6, J7, J8, J9 |
| 4 | Mid | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV5, RV9, RV13 |
| 4 | Bass | Potentiometer_Alps_RK09K_Single_Vertical | RV2, RV6, RV10, RV14 |
| 4 | Treble | Potentiometer_Alps_RK09K_Single_Vertical | RV3, RV7, RV11, RV15 |
| 4 | Volume | Potentiometer_Alps_RK09K_Single_Vertical | RV4, RV8, RV12, RV16 |
| 11 | CTEB_2.2UF_35V_10%_254-500X840 KEMET | CAPPRB254-500X840 | C1, C2, C4, C5, C13, C14, C22, C23 +3 |
| 29 | CC1206_100NF_50V_10%_X7R GENERIC | CAPC3216X140N | C3, C6, C7, C8, C9, C10, C11, C12 +21 |
| 47 | R1206_10K_1%_0.25W_100PPM GENERIC | RESC3216X65N | R1, R2, R3, R4, R5, R6, R7, R8 +39 |
Test1 design files
The KiCad project lives in the pginfinitylab-ai/forge repository on GitHub; these links point at the commit this page was built from.
Test1: common questions
How big is the Test1 PCB?
The Test1 measures 110 × 111 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Test1?
114 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Test1 design files?
From the pginfinitylab-ai/forge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Test1 design in my own project?
The repository has no license, so all rights stay with pginfinitylab-ai. Use it as a reference, and ask the author before reusing the design.
More boards in forge
STM32
Test4.routed
pginfinitylab-ai
60 × 40 mm27 parts2LNo license0STM32
Test4
pginfinitylab-ai
60 × 40 mm27 parts2LNo license0Test3.routed
pginfinitylab-ai
50 × 40 mm26 parts2LNo license0Test3.routed.pass2.routed
pginfinitylab-ai
50 × 40 mm26 parts2LNo license0Test3.routed.pass2
pginfinitylab-ai
50 × 40 mm26 parts2LNo license0Test3
pginfinitylab-ai
50 × 40 mm24 parts2LNo license0