Test4
pginfinitylab-ai·forge·board/test4/test4.kicad_pcb
About the Test4 PCB
Test4 is an open source STM32 PCB design by pginfinitylab-ai, published on GitHub. It is a 2-layer board measuring 60 × 40 mm, with 27 components from 15 distinct parts.
Its main chip is the STM32F407VGT6, from the STM32 family. Other key parts include the AP2112K-3.3TRG1. By type, the board carries 16 capacitors, 4 resistors, 2 ICs, 2 connectors, 1 crystal and 1 switch.
From the project
UST Forge (formerly CircuitMind) is an engineering-grade AI-powered, end-to-end product engineering platform covering Electronics · Firmware · Mechanical · Simulation · Validation, designed to operate alongside KiCad 10.x, ngspice, Renode, FreeCAD, and Freerouting.
UST Forge (formerly CircuitMind) is an engineering-grade AI-powered, end-to-end product engineering platform covering Electronics · Firmware · Mechanical · Simulation · Validation, designed to operate alongside KiCad 10.x, ngspice, Renode, FreeCAD, and Freerouting.
It combines deterministic EDA analysis, native KiCad tooling, structured engineering knowledge, multi-plane design graphs, vector retrieval, and controlled execution to provide an AI-assisted hardware engineering environment.

Main components on the Test4
Test4 bill of materials (BOM)
27 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3TRG1 Diodes Incorporated | SOT-23-5 | U1 |
| 1 | STM32F407VGT6 STMicroelectronics | LQFP-100_14x14mm_P0.5mm | U2 |
| 1 | ABLS-8.000MHZ-B4-T 8MHz Abracon | Crystal_SMD_HC49-SD | Y1 |
| 1 | USB4125-GF-A GCT | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
| 1 | FTSH-105-01-L-DV-K Samtec | PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | TL3342F160QG E-Switch | SW_SPST_TL3342 | SW1 |
| 1 | LTST-C190KRKT Vf=2.0V Lite-On | LED_0603_1608Metric | D1 |
| 3 | CL21B105KBANNNC 1uF Samsung Electro-Mechanics | C_0805_2012Metric | C1, C2, C13 |
| 2 | CL21B270KBANNNC 27pF Samsung Electro-Mechanics | C_0805_2012Metric | C3, C4 |
| 8 | CL21B104KBANNNC 100nF Samsung Electro-Mechanics | C_0805_2012Metric | C5, C6, C7, C8, C9, C10, C12, C16 |
| 1 | CL21B475KBANNNC 4.7uF Samsung Electro-Mechanics | C_0805_2012Metric | C11 |
| 2 | CL21B225KBANNNC 2.2uF Samsung Electro-Mechanics | C_0805_2012Metric | C14, C15 |
| 2 | RC0603FR-075K1L 5100ohm Yageo | R_0603_1608Metric | R1, R2 |
| 1 | RC0603FR-0710KL 10000ohm Yageo | R_0603_1608Metric | R3 |
| 1 | RC0603FR-07604RL 604ohm Yageo | R_0603_1608Metric | R4 |
Test4 design files
The KiCad project lives in the pginfinitylab-ai/forge repository on GitHub; these links point at the commit this page was built from.
Test4: common questions
What microcontroller does the Test4 use?
The Test4 is built around the STM32F407VGT6, from the STM32 family.
How big is the Test4 PCB?
The Test4 measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Test4?
27 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Test4 design files?
From the pginfinitylab-ai/forge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Test4 design in my own project?
The repository has no license, so all rights stay with pginfinitylab-ai. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Test4 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in forge
Test1
pginfinitylab-ai
110 × 111 mm114 parts2LNo license0STM32
Test4.routed
pginfinitylab-ai
60 × 40 mm27 parts2LNo license0Test3.routed
pginfinitylab-ai
50 × 40 mm26 parts2LNo license0Test3.routed.pass2.routed
pginfinitylab-ai
50 × 40 mm26 parts2LNo license0Test3.routed.pass2
pginfinitylab-ai
50 × 40 mm26 parts2LNo license0Test3
pginfinitylab-ai
50 × 40 mm24 parts2LNo license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k