Bluetooth-Board
phancak·Bluetooth-Board
About the Bluetooth-Board
Bluetooth-Board is an open source STM32 PCB design by phancak, published on GitHub under the MIT license. It is a 4-layer board measuring 65 × 65 mm, with 55 components from 39 distinct parts.
Its main chip is the STM32WB55CGU6, from the STM32 family. Other key parts include the USBLC6-2SC6. By type, the board carries 21 capacitors, 17 connectors, 4 ICs, 4 inductors, 2 crystals and 2 resistors.
It belongs with the iot & wireless, keyboards and power & battery designs in this gallery.
From the project
A low-power, compact keypad module based on the STM32L010K4T6 microcontroller. This project includes a 12-button keypad interfaced with a host MCU via I2C or UART, designed to serve as a mini keyboard for embedded systems. The STM32L010K4T6 handles debouncing and key scanning, reducing the load on the host system.
This expansion board provides I2C, USART, and SPI interfaces, making it a versatile platform for IoT, industrial control, and smart embedded systems.
Main components on the Bluetooth-Board
Bluetooth-Board bill of materials (BOM)
55 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32WB55CGU6 | STM32WB55CGU6_QFN50P700X700X60-49N-D | IC1 |
| 2 | ~ | Button_KMR231GLFS | U2, U6 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | ECS-327MVATX-7-CN-TR Clock_ECS-327MVATX-7-CN-TR | Clock_ECS327MVATX7CNTR | Y3 |
| 1 | ABM3B-32.000MHZ-8-R30-B1U-T | XTAL_ABM3B-32.000MHZ-10-R30-B1U-T | Y4 |
| 1 | 5V Power Pins | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | 60311002111526 SMA PCB END LAUNCH JACK ROUND PO Wurth Elektronik | SMA Clip Mount Adapter (top) | J2 |
| 1 | User Button Jumper | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Coin Battery Jumper | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Power Pins | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J6 |
| 1 | Pin_Header | PinHeader_2x07_P2.54mm_Vertical | J7 |
| 1 | BOOT0_Jumper | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | I2C1_Header | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | LPUART1_Header | PinHeader_1x04_P2.54mm_Horizontal | J10 |
| 1 | 3V3 Power Pins | PinHeader_2x03_P2.54mm_Vertical | J11 |
| 1 | 3V3 Power Source Jumpers | PinHeader_2x03_P2.54mm_Vertical_PINS | J13 |
| 1 | Debug_Pins | PinHeader_2x04_P2.54mm_Vertical | J14 |
| 1 | USART1_Header | PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | ~ | SMA Clip Mount Adapter (bottom) | J17 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Power Select Jumpers | PinHeader_2x03_P2.54mm_Vertical_PINS | J19 |
| 1 | SPI1_Header | PinHeader_1x06_P2.54mm_Horizontal | J20 |
| 1 | 1060TR Battery_Holder_1060TR | Battery_Holder_1060TR | BH1 |
| 2 | ESDALC6V1W5 | SOT323-5L_STM-L | ESD1, ESD2 |
| 1 | DLF162500LT-5028A1 | DLF162500LT-5028A1 | FLT1 |
| 1 | TLV75733PDBVR LDO_TLV75733PDBVR | LDO_SOT95P280X145-5N | LDO1 |
| 1 | BLM21PG601SN1D_0805 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | FB1 |
| 1 | 2n7 LQG15HS2N7S02 | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | 10u Murata LQM21FN100M70L | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L4 |
| 1 | 10n Murata LQG15WZ10NJ02D | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L5 |
| 1 | 0p3 GRM1555C1HR30WA01D | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7 |
| 2 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C36 |
| 1 | 0p8 GRM1555C1HR80BA01D | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12 |
| 1 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19 |
| 8 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20, C21, C22, C27, C29, C30, C33, C34 |
| 5 | 4u7 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23, C26, C28, C31, C32 |
| 3 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C25, C35 |
| 1 | 10R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
Bluetooth-Board design files
The KiCad project lives in the phancak/Bluetooth-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutBluetooth_Board.kicad_pcb
- SchematicBluetooth_Board.kicad_sch
Bluetooth-Board: common questions
What microcontroller does the Bluetooth-Board use?
The Bluetooth-Board is built around the STM32WB55CGU6, from the STM32 family.
How big is the Bluetooth-Board?
The Bluetooth-Board measures 65 × 65 mm, has 4 copper layers and is 1.5842 mm thick.
How many components are on the Bluetooth-Board?
55 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bluetooth-Board design files?
From the phancak/Bluetooth-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bluetooth-Board design in my own project?
Yes, under the terms of its MIT license, which phancak chose for the repository.
Can I test firmware for the Bluetooth-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k