Datatrak locator mk2
philpem·datatrak-locator-mk2
About the Datatrak locator mk2 PCB
Datatrak locator mk2 is an open source PCB design by philpem, published on GitHub. It is a board, with 15 components from 12 distinct parts.
Other key parts include the 68HC000, ASIC_S0089-1_CF30192X and 93LC66. By type, the board carries 3 ICs, 2 test points, 2 diodes and 1 battery holder.
It belongs with the retro computing designs in this gallery.
From the project
Datatrak Locator Mk.2 reverse-engineered schematic
This is part of my work reverse-engineering the Datatrak LF navigation system -- specifically, it's a reverse-engineered schematic for the Locator Mk.2 navigation receiver.
I largely undertook this multi-year project (I started the PCB reverse-engineering in 2019 and finished it in mid-2022) as an experiment. My main objective was to make some use out of the half-dozen Datatrak receivers in my spares drawer, but I also wanted to improve my processes for de-layering and reverse-engineering complex multi-layer PCBs.
Main components on the Datatrak locator mk2
Datatrak locator mk2 bill of materials (BOM)
15 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 68HC000 | DIP-64_W22.86mm | IC2 |
| 1 | ASIC_S0089-1_CF30192X | IC3 | |
| 1 | 93LC66 | IC10 | |
| 1 | CR2430 3V | BT1 | |
| 2 | TC551001 | RAM1, RAM2 | |
| 2 | TC55257 | RAM3, RAM4 | |
| 2 | TestPoint | TP3, TP4 | |
| 1 | 74HC32 | Ub6 | |
| 1 | 74HC04 | Ub7 | |
| 1 | DS1234S | Ub10 | |
| 1 | RED | D9 | |
| 1 | GREEN | D10 |
Datatrak locator mk2 design files
The KiCad project lives in the philpem/datatrak-locator-mk2 repository on GitHub; these links point at the commit this page was built from.
- Schematiclocv2_68000cpu.kicad_sch
Datatrak locator mk2: common questions
How many components are on the Datatrak locator mk2?
15 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Datatrak locator mk2 design files?
From the philpem/datatrak-locator-mk2 repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Datatrak locator mk2 design in my own project?
The repository has no license, so all rights stay with philpem. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k