Combined
pilotgutt·public-rwdm·PCB/Combined/Combined/Combined.kicad_pcb
About the Combined PCB
Combined is an open source STM32 PCB design by pilotgutt, published on GitHub. It is a 2-layer board measuring 64.5 × 58.5 mm, with 44 components from 23 distinct parts.
Its main chip is the STM32G0B1RETX, from the STM32 family. Other key parts include the MAX3232, AMS1117-3.3 and LSM9DS1. By type, the board carries 15 capacitors, 11 resistors, 10 connectors, 4 ICs, 2 switches and 1 crystal.
It belongs with the iot & wireless designs in this gallery.
From the project
Real-Time Monitoring of Diver Status using Wireless Subsea Transmission
Real-Time Monitoring of Diver Status using Wireless Subsea Transmission (RWDM) is a bachelor project aimed at monitoring diver status in real time and communicating information through a wireless subsea transmission link. This bachelor project marks the culmination of our studies in the TS3000 program at the Department of Microsystems, Faculty of Technology, Natural Sciences and Maritime Sciences. The work was carried out during the spring semester of 2026 and represents a collaborative research and development effort focused on Real-Time Wireless Diver Monitoring (RWDM).
Main components on the Combined
Combined bill of materials (BOM)
44 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX3232 | SOIC-16W_7.5x10.3mm_P1.27mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | LSM9DS1 | LGA-24L_3x3.5mm_P0.43mm | U4 |
| 1 | STM32G0B1RETX STM32G0B1RETx | LQFP-64_10x10mm_P0.5mm | U8 |
| 1 | 24MHZ 24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | TerminalBlock_Phoenix_MKDS-1-2-3.81_1x02_P3.81mm_Horizontal | J1 |
| 4 | CONN_01X08_PIN Conn_01x08_Pin | Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J2, J6, J7, J10 |
| 2 | CONN_01X04 Conn_01x04 | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J3, J5 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
| 2 | CONN_01X06_PIN Conn_01x06_Pin | Molex_Micro-Fit_3.0_43045-0612_2x03_P3.00mm_Vertical | J8, J9 |
| 1 | SW_Push_Dual | SW_Push_1P1T_NO_CK_KSC9xxG | SW1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW2 |
| 1 | GREEN | LED_1206_3216Metric | PWR1 |
| 6 | 100N 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C34, C35 |
| 2 | 0.22U 0.22u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C10 |
| 3 | 22U 22u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6, C7, C29 |
| 1 | 10N 10n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 2 | 10P 10p | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C32, C33 |
| 1 | 10U 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C36 |
| 2 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 10K 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R6, R13, R16 |
| 2 | 4K7 4k7 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R15 |
| 1 | 1K5 1k5 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17 |
Combined design files
The KiCad project lives in the pilotgutt/public-rwdm repository on GitHub; these links point at the commit this page was built from.
Combined: common questions
What microcontroller does the Combined use?
The Combined is built around the STM32G0B1RETX, from the STM32 family.
How big is the Combined PCB?
The Combined measures 64.5 × 58.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Combined?
44 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Combined design files?
From the pilotgutt/public-rwdm repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Combined design in my own project?
The repository has no license, so all rights stay with pilotgutt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Combined without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in public-rwdm
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k