1206 LED satellite board

PinBus·1206_LED_satellite_board

1206 LED satellite board layout, top view — open source board by PinBus

About the 1206 LED satellite board

1206 LED satellite board is an open source PCB design by PinBus, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 30 × 10 mm, with 5 components from 3 distinct parts.

By type, the board carries 3 diodes, 1 connector and 1 resistor.

It belongs with the rf & radio designs in this gallery.

From the project

This board is designed for three 1206 SMD LEDs. It can be used with the TLC5940 LED Driver Board. The LEDs are connected in series.

This board is designed for three 1206 SMD LEDs. It can be used with the TLC5940 LED Driver Board. The LEDs are connected in series.

Replace the 0Ω resistor R0 when not using a LED driver IC. You can use any colour of LED for D1, D2, and D3.

Warning: These designs are made as part of a hobby project and thus come with no guarantees. Do not use these designs in for any critical systems! Working with voltages higher than +40V can be potentially dangerous, please take appropriate safety measures!

1206 LED satellite board, from the project README
From the project README

1206 LED satellite board bill of materials (BOM)

5 components, 3 distinct parts.

QtyPartRefs
1
Conn_01x02_Male
J1
3
LED
D1, D2, D3
1
0R
R1

1206 LED satellite board design files

The KiCad project lives in the PinBus/1206_LED_satellite_board repository on GitHub; these links point at the commit this page was built from.

1206 LED satellite board: common questions

How big is the 1206 LED satellite board?

The 1206 LED satellite board measures 30 × 10 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 1206 LED satellite board?

5 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the 1206 LED satellite board design files?

From the PinBus/1206_LED_satellite_board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 1206 LED satellite board design in my own project?

Yes, under the terms of its GPL-3.0 license, which PinBus chose for the repository.

Similar boards