Tutorial devboard

plastuchino·tutorial-devboard

Tutorial devboard PCB layout, top view — open source STM32 board by plastuchino

About the Tutorial devboard PCB

Tutorial devboard is an open source STM32 PCB design by plastuchino, published on GitHub. It is a 2-layer board measuring 48.6 × 38 mm, with 29 components from 16 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 6 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

Main components on the Tutorial devboard

Tutorial devboard bill of materials (BOM)

29 components, 16 distinct parts.

QtyPartRefs
1
STM32F103C8T6
U1
1
AMS1117-3.3
U2
1
Crystal_GND24
Y1
3
Conn_01x04_Pin
J1, J2, J3
1
USB_C_Plug_USB2.0
P1
1
SW_SPDT
SW1
1
RED
D1
1
120R
FB1
7
100n
C1, C2, C3, C4, C9, C12, C13
1
10u
C5
1
10n
C6
2
1u
C7, C8
2
10pF
C10, C11
1
10k
R1
4
1k5
R2, R3, R4, R5
1
5.1k
R6

Tutorial devboard design files

The KiCad project lives in the plastuchino/tutorial-devboard repository on GitHub; these links point at the commit this page was built from.

Tutorial devboard: common questions

What microcontroller does the Tutorial devboard use?

The Tutorial devboard is built around the STM32F103C8T6, from the STM32 family.

How big is the Tutorial devboard PCB?

The Tutorial devboard measures 48.6 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tutorial devboard?

29 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tutorial devboard design files?

From the plastuchino/tutorial-devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tutorial devboard design in my own project?

The repository has no license, so all rights stay with plastuchino. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Tutorial devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards