R1008
pluggee·R1008·pcb/R1008.kicad_pcb
About the R1008 PCB
R1008 is an open source Silicon Labs PCB design by pluggee, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 51 × 36.3 mm, with 39 components from 11 distinct parts.
Its main chip is the EFM8BB10F2G-A-QFN20R, from the Silicon Labs family. Other key parts include the MAX31865AAP+ and ART. By type, the board carries 12 resistors, 11 test points, 7 capacitors, 5 connectors, 3 ICs and 1 module.
It belongs with the sensors designs in this gallery.
From the project
Dual Platinum RTD Sensors
Main components on the R1008
R1008 bill of materials (BOM)
39 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MAX31865AAP+ Maxim Integrated | SOP65P720X530X186-20 | U1, U2 |
| 1 | EFM8BB10F2G-A-QFN20R EFM8BB10F8G Silicon Labs | QFN50P300X300X75-20NT170X170 | U4 |
| 1 | ART | pluggeeLabsIcon-13X7 | A1 |
| 1 | PCIEXPRESS-X1 | PCIEXPRESS-X1 | J1 |
| 2 | 70553-0038 SOCKET254P-01X04-1725672 Molex | 70553-0038 | J2, J3 |
| 2 | 68001-403HLF CONN_01X03 Amphenol FCI | CONN254P-01X03 | J4, J6 |
| 11 | TestPoint | TestPoint000 | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +3 |
| 7 | CC0603KRX7R9BB104 Yageo | CAPC0603 | C1, C2, C3, C4, C5, C6, C7 |
| 8 | RC0603FR-0710KL Yageo | RESC0603 | R1, R4, R5, R6, R7, R8, R11, R12 |
| 2 | RC0603FR-071KL Yageo | RESC0603 | R2, R3 |
| 2 | RN732BTTD4000B25 KOA Speer | RESC1206 | R9, R10 |
R1008 design files
The KiCad project lives in the pluggee/R1008 repository on GitHub; these links point at the commit this page was built from.
R1008: common questions
What microcontroller does the R1008 use?
The R1008 is built around the EFM8BB10F2G-A-QFN20R, from the Silicon Labs family.
How big is the R1008 PCB?
The R1008 measures 51 × 36.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the R1008?
39 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the R1008 design files?
From the pluggee/R1008 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the R1008 design in my own project?
Yes, under the terms of its GPL-3.0 license, which pluggee chose for the repository.
Can I test firmware for the R1008 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Silicon Labs firmware against it before you order a PCB.
Similar boards
Silicon Labs
Tomu hardware
im-tomu
13 × 9.4 mm11 parts2LCC-BY-SA-4.0365Silicon Labs
2key
ahtn
36.5 × 17.5 mm7 parts2LNo license96Silicon Labs
One key
ahtn
14.5 × 14.5 mm10 parts2LNo license96Silicon Labs
Ble soil moisture sensor pannel
Miceuz
170 × 36 mm29 parts2LApache-2.033Silicon Labs
Ble soil moisture sensor
Miceuz
170 × 18 mm33 parts2LApache-2.033Silicon Labs
Ym2413 dev
andete
115 × 45 mm146 parts2LNo license25