8 open source boards using the ART
Real designs built with the ART, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Cantaloupe
Kaleidogeist
143.9 × 118.7 mm121 parts2LCERN-OHL-S-2.032Raspberry Pi
Piweather
pluggee
65 × 64 mm58 parts4LMIT1Silicon Labs
R1001
pluggee
51 × 34.3 mm44 parts4LGPL-3.01Silicon Labs
R1008
pluggee
51 × 36.3 mm39 parts2LGPL-3.01R1007
pluggee
69 × 38.6 mm33 parts4LGPL-3.01R1003
pluggee
45 × 33.3 mm26 parts2LGPL-3.01R1002
pluggee
47 × 33.3 mm10 parts2LGPL-3.01R1005
pluggee
45 × 33.3 mm3 parts2LGPL-3.01
The ART in open source designs
The gallery holds 8 open source boards using the ART from 8 GitHub repositories; a typical one measures about 51 × 35.3 mm and carries around 36 components.
63% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Cantaloupe by Kaleidogeist.
Microcontrollers on boards using the ART
What boards using the ART are built for
ART: common questions
Where can I find a ART reference design?
Each of the 8 boards on this page is a real design using the ART. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ART use?
Most are built on Silicon Labs (2), Raspberry Pi (1) and STM32 (1).
How big is a typical board using the ART?
The median is 51 × 35.3 mm, and 63% are two-layer designs.
What is the most popular open source board using the ART?
By GitHub stars, Cantaloupe by Kaleidogeist, with 32 stars.
Can I simulate one of these boards using the ART before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.